tray doesnt eject help needed

willytuercas · #1 23-03-2002, 08:13

i need help. I have a PS2 v4 with neo 2.2 and the tray doesn't eject when i tried to boot DVDr's.

Can i boot dvdrs with this version 4 board and neo 2.2 ?

Arakon · #2 23-03-2002, 08:58

your install is prolly not complete then. all 8 wires need to be connected for the EA trick to work.

schumy2001 · #3 23-03-2002, 14:25

and also try to install the condensator. Its a little chip with 2 ends wich you have to solder. Dust2dust knows more about it

Arakon · #4 23-03-2002, 15:42

it's actually not a chip.
you need a 1 uf, 100 V capacitor, + side to the chip, - side to pin 2 on the board.
without that capacitor, the neo WILL destroy the laser. also, you should add a resistor to further lower the signal leve.

look here: http://jone.fateback.com/Umbau_PS2_P...3/Neo2.2cr.jpg

however, that won't stop the EA trick from working.

dust2dust · #5 24-03-2002, 04:18

who needs me arakon is here
only thing id add is forget the neo2.2 get a messiah

Arakon · #6 24-03-2002, 05:12

yep, very true.
my ps2 had a neo 2.2 for a whole 3 days before I ordered a messiah.. and it works perfectly.