Go Back   FileForums > Game Backup > Sony PlayStation > PS2 Games
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 22-01-2002, 20:19
parkgamer parkgamer is offline
Member
 
Join Date: Dec 2001
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
parkgamer
origa 1. 25 I tested in the scph10000. conclusion.

origa 1. 25 good. afflicts that the dvdx use doesn't leave to work films of another area. because when I insert the dvd films. I choose the area. he is stopped in the screen of the dvdx.
I made a topic that he worked with me and the one of which I didn't test. this below
PS2 DVD-R Copies ( no tested) swap
PS2 DVD Silvers ( no tested ) swap
PS2 DVD Imports originals (tested perfect work ) direct boot
PS2 CD Imports originals (tested perfect work ) direct boot
PS2 CDR ( tested perfect work ) swap
PS2 CD Silvers ( no tested ) swap
Play1 Imports originals (tested perfect work ) direct boot
Play1 Silvers (tested perfect work ) direct boot
Play1 CDR (tested perfect work ) direct boot
MULTI REGION DVD Playback (don't work with dvdx. only an inconvenience)
: but even so I didn't forget that I bought two bad origa of hadstore. am I trying to speak with hadstore to substitute the bad origas?
__________________
SCPH 10000Origa ver. 1.25 (perfect work )DVD Region X USA no Burner of DVD however only of cdr!
Reply With Quote
Sponsored Links
  #2  
Old 23-01-2002, 04:31
Charlie
Guest
 
Posts: n/a
I am delighted that the Chip works. This means that the 18000 is incompatible with the Chip.

DVDRX might be a problem. I've not got it working on my 15000 because I haven't found codes to load for the DVD driver version. Also, the 10000/15000/18000 series will not play PAL DVD videos under any circumstances.

Finally, was my diagram of the connexion points helpful to you?
Reply With Quote
  #3  
Old 23-01-2002, 06:47
Arakon Arakon is offline
Die Hard Member
 
Join Date: Jan 2002
Location: Germany
Posts: 584
Thanks: 0
Thanked 0 Times in 0 Posts
Arakon
Quote:
Charlie (23-01-2002 12:31):
DVDRX might be a problem. I've not got it working on my 15000 because I haven't found codes to load for the DVD driver version. Also, the 10000/15000/18000 series will not play PAL DVD videos under any circumstances.
well, I got the 10000 and don't have the codes for that either for the region X.. and can't tell you which were used on mine when someone installed the dvd drivers for me, and apparently the region X setup to go with it. however, since there are none on the region x page for my version either, I assume he possibly just entered a random code or just 0's.. it crashes when I try to boot a DVD video with it, but it still works just fine for swapping.
__________________
--
Arakon
Reply With Quote
  #4  
Old 23-01-2002, 07:12
parkgamer parkgamer is offline
Member
 
Join Date: Dec 2001
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
parkgamer
: : I didn't use that diagram for installation of the origa 1. 25. I still didn't test that origa in my 18000. I will test today. I have two bad origa was them that he didn't work in the 18000 and nor in the 10000. dvdx doesn't also play dvd films. for instance I catch a film of area four. I remove the cd. I insert the film. he arrests in the screen of the dvdx. Will I try game shark v2?
__________________
SCPH 10000Origa ver. 1.25 (perfect work )DVD Region X USA no Burner of DVD however only of cdr!
Reply With Quote
  #5  
Old 23-01-2002, 08:31
Charlie
Guest
 
Posts: n/a
Quote:
parkgamer (23-01-2002 15:12):
: : I didn't use that diagram for installation of the origa 1. 25. I still didn't test that origa in my 18000. I will test today. I have two bad origa was them that he didn't work in the 18000 and nor in the 10000. dvdx doesn't also play dvd films. for instance I catch a film of area four. I remove the cd. I insert the film. he arrests in the screen of the dvdx. Will I try game shark v2?
I think your 18000 wires are wrong. I have provided diagram to show difference. You could send an e-mail to DTAEL or CODEJUNKIES and ask them for the codes. Otherwise you will not get different region DVDs working. All I can play on my 15000 are Region 2 NTSC and Region Free DVDs (the back street shops do these).
Reply With Quote
  #6  
Old 23-01-2002, 08:46
parkgamer parkgamer is offline
Member
 
Join Date: Dec 2001
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
parkgamer
who test origa 1. 25 with the action replay v2. would like to know if worked dvd-R ,cd-R .dvd films all areas?: it was not wrong the diagrams I organized and I don't work but the origa that I tested was bad will test that ta working charlie
__________________
SCPH 10000Origa ver. 1.25 (perfect work )DVD Region X USA no Burner of DVD however only of cdr!
Reply With Quote
  #7  
Old 23-01-2002, 18:54
jumpstart jumpstart is offline
Member
 
Join Date: Jun 2001
Posts: 81
Thanks: 0
Thanked 0 Times in 0 Posts
jumpstart
congrats parkgamer!

at last its working, though 2/3 of 18000 board really dont work on the origa 1.25.

Regarding the DVD playback:
i cant play DVD Region 1,3-6 when using the DVD-Region US version...
When playing these regions i used my DVD Region X (jap). This is the one with the dongle... and it works perfectly (except for PAL movies)...

hope these helps!
HAPPY PLAYIN!!!!
__________________
Jumpstart\nSCPH 15000\nOriga ver. 1.25 Jap\nDVD Region X\nNo DVD Burner yet!
Reply With Quote
  #8  
Old 23-01-2002, 19:50
parkgamer parkgamer is offline
Member
 
Join Date: Dec 2001
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
parkgamer
then with dvdx jap you get to change for all of the areas. I with my dvdx use don't get to work dvd area some. you already tested the new action replay v2 with origa 1. 25.
I would like to know. with him the origa 1. 25 work. dvd-r ,cd-r. the whole area of the dvd
__________________
SCPH 10000Origa ver. 1.25 (perfect work )DVD Region X USA no Burner of DVD however only of cdr!
Reply With Quote
  #9  
Old 23-01-2002, 21:42
Arakon Arakon is offline
Die Hard Member
 
Join Date: Jan 2002
Location: Germany
Posts: 584
Thanks: 0
Thanked 0 Times in 0 Posts
Arakon
the origa has no influence AT ALL on the dvd video playback.
the ps2 is a very poor DVD player.. by far not all movies will work on it, and on a jap or US model, it's impossible to play back PAL (european) DVDs, even with a region X. they're simply not capable of outputting a PAL signal during dvd playback.
__________________
--
Arakon
Reply With Quote
  #10  
Old 24-01-2002, 17:41
parkgamer parkgamer is offline
Member
 
Join Date: Dec 2001
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
parkgamer
Quote:
parkgamer (23-01-2002 04:19):
origa 1. 25 good. afflicts that the dvdx use doesn't leave to work films of another area. because when I insert the dvd films. I choose the area. he is stopped in the screen of the dvdx.
I made a topic that he worked with me and the one of which I didn't test. this below
PS2 DVD-R Copies (tested perfect work ) swap
PS2 DVD Silvers ( no tested ) swap
PS2 DVD Imports originals (tested perfect work ) direct boot
PS2 CD Imports originals (tested perfect work ) direct boot
PS2 CDR ( tested perfect work ) swap
PS2 CD Silvers ( tested perfect work ) swap
Play1 Imports originals (tested perfect work ) direct boot
Play1 Silvers (tested perfect work ) direct boot
Play1 CDR (tested perfect work ) direct boot
MULTI REGION DVD Playback (don't work with dvdx. only an inconvenience)
: but even so I didn't forget that I bought two bad origa of hadstore. am I trying to speak with hadstore to substitute the bad origas?
__________________
SCPH 10000Origa ver. 1.25 (perfect work )DVD Region X USA no Burner of DVD however only of cdr!
Reply With Quote
  #11  
Old 24-01-2002, 17:44
parkgamer parkgamer is offline
Member
 
Join Date: Dec 2001
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
parkgamer
: I tested dvd-r in the origa1. 25 perfect work. an action replay v2 was used for dvd-r ,cd-r. next days I will test CD Silvers
__________________
SCPH 10000Origa ver. 1.25 (perfect work )DVD Region X USA no Burner of DVD however only of cdr!
Reply With Quote
  #12  
Old 25-01-2002, 19:12
parkgamer parkgamer is offline
Member
 
Join Date: Dec 2001
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
parkgamer
: I tested cd silver with origa 1. 25 worked perfect. game shark v2 works DVD-R and CD-R
__________________
SCPH 10000Origa ver. 1.25 (perfect work )DVD Region X USA no Burner of DVD however only of cdr!
Reply With Quote
  #13  
Old 26-01-2002, 06:48
Charlie
Guest
 
Posts: n/a
So Origa 1.25 is a good chip? Well done Parkgamer. What is your view now on the 18000?
Reply With Quote
  #14  
Old 26-01-2002, 15:58
parkgamer parkgamer is offline
Member
 
Join Date: Dec 2001
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
parkgamer
: that my 18000 no and compatible with the origa. doesn't defend the hadstore that really I have two bad origa?
__________________
SCPH 10000Origa ver. 1.25 (perfect work )DVD Region X USA no Burner of DVD however only of cdr!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -7. The time now is 12:53.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
FileForums @ https://fileforums.com