PROBLEM WITH PLEXTOR 12/10/32A

Can anyone help me ?
I have bought a PLEXTOR 12/10/32A because here they say that is the better
IDE CD-RW unit, but i could not
burn successfuly one dreamcast game with it.
When i try to use diskjuggler 3 it begans to
copy the data to the disk and all seems to
be going well but when it has to finish recording at the end it displays: Event 17812 "(CDB: 2a000004aae100000a00, Status: 040002, Sense: 052400) illegal field in command descriptor block".
And the recording is
finished but it
does not work on the dreamcast.
What the hell is this ?
I used to burn games with my old generic rewriter 6x2x2 with diskjuggler 3
and i have never had any problem.
And if i try to install diskjuggler 2.0, i install it
but when i try to run it, it gives me some
errors about asapi or something similar
and the program is
terminated and i can not even start it.
What can i do ?

[webber]

first off use the generic jinxter ghost driver at dccopyworld.com in the utilities section,
next the settings are crucial those errors are typical wrong settings like block size etc... all settings are different for different burners,
and finally please tell me you are not trying to burn an original dc game because that just can't be done unless you are using gods personal cd burner "the god burner" lol

regards
webber

Well i am only trying to burn cdi images in the same way that i did with my
old obsolete cd-rw 6*2*2 using the same options and setting with diskjuggler 3 and i am obtaining this error
at the end of the recording.

What is jinxter ghost driver ?
I looked for it on the dcutilities
section and i
could not find anything.

And why i can not run diskjuggler 2 ?

Well really i am getting very ungry.

I have bought the plexor 12/10/32A
burner because it is said to
be excellent and i am only doing coasters.

I have installed forceaspi1.7 and finally i could install dikjuggler 2
and i could only
burn with success one game: TOKIO.

I ahve also
installed
the jinxter ghost driver.

In summary i try to burn 10 CDs and i only got success in 1 CD, i think that is a very bad rate, i was tired of
my old generic obsolete cd-rw
6*2*2 because it was slow but with
this old one i have never
had any problem burning games
with dikjuggler 3 or any other software.
Now i have spent U$S 323 in this plexor cd-rw and i am
only throwing discs to trash.

I have configured diskjuggler as follows:

Mode 2
2336
cdrom
Raw: activate.
Karaoke: activate

And i have also tried to burn at 1x and the same result, the first tracks are
always recorded successfully but the last track (about 1M) when it tries to write
it gives me an error: Event 17812 "(CDB: 2a000004aae100000a00, status: 040002, Sense: 052400) illegal field
in command descriptor block"
or something similar with different numbers.
It looks like it can not
write this last
short track properly.
I have also tried converting cdi image to nrg (nero), i have converted it
well but then when i try to burn it,
the process goes on normally the, burn proccess completes and reachs the 100% but then it gives me some error
messages
in red and the copy does not work.

I can not really understand it, i could with my old cd-rw overburn for example the cdi 80:30 image of sould calibur and with this new
cd-rw i can not even burn well anything.

Please someboby help me.

Perhaps my cd-rw is damaged ?

On other hand, i have
also
installed winoncd 3.8 power edition but i can not figure
out how to open and burn a cdi image.
This program let my only open cdj and c2d project files but
i can not open cdi files.
Please can anybody explain me how to open, configure the
parameters and burn a cdi
image succsesfuly with this program ?

Thanks, good bye.

[sugar]

Well i am having exactly the
same
problem, can anybody help us ?