swap chip problem

[gamesmell]

its an old chip that use to be in anouther ps2 I installed it in a frends ps2 cause I no longer need it but

the problem is it wont stick out the disc tray it started to do this after
he accsedentley terned off the power with the tray out from the chip being aciveated and after that it would not stick it out again

so is the swap chip compleatley fryed or is there something
I can do to get it to work?

[lufcfan]

Just rip it out and get a decent no swap mod.

[Warlock]

Remove the chip, then see if the console works correctly.

[gamesmell]

its not my consose and the console itself works fine with or whithout the chip but when you hold down the eject button all it dose is the light terns yellow(as its sopose to) and after a sec or 2 you hear the motor struggle trying to bring back in the the already in disc tray

[seaneyb2003]

yea its ment to u have to quickly put the game in then use swap crap disks ask evo hes the guru at swap magic.

[Warlock]

What chip is it? a no solder??

[gamesmell]

its the v4 No Solder mod chip of course

[seaneyb2003]

the v4 ones are very quier make sure you have plugged the little plugs into the mobo and onto the modchip and make sure nothings shorted out.

Hope this helps.

[gamesmell]

it is installed correctley like I sead befor it was working before he terned it off with it actavated
I did check it to make shure it did not nock itsself loose

[Warlock]

If the tray ejects under normal use but not when preforming the swap trick then the chip is damaged. If it was a loose connection it wouldnt eject under normal conditions.

[seaneyb2003]

hey,

remember the chip wont activate till you put in the swap magic disks.

i think

open the ps2 and remove the modchip.then pug the connectors back in turn the ps2 on see if its all cool if so. turn it off plug the modchip back in and load up swap magic. Maybe the chip is faulty i suggest you give a modchip installer a bell and ask him to fit a proper mod (duo magic 5 m2 dms3). Then you be able to play games without swapping

[gamesmell]

thats not true if it was working it would eject if you hold down the eject button it is conpleatley unaware what disc you have in it or wether or not you have a disc in at all

and Im perfectley capable of installing any modchip myself
like I sead befor I have a dms3 im asking on the behafe of a frend

I just want ot know if there is anything I can do to fix this one?

[seaneyb2003]

SOUNDS TO ME LIKE ITS DIED

[EVOEvo]

just buy u another v4 no solder chip there only like $10 for the chip i bet thats the problem

[seaneyb2003]

thats come from the horses mouth he knows lots about non solders.