|
#1
|
|||
|
|||
|
X2.3B Ground Wire Prob
I had my X2.3B Pro installed, and the installer said that it worked fine. But when I got there, he was gonna how me how to use the dip switches, and he plugged it up and it didnt work. The XBox came on for a split second then cut itself off. After playing around with it, we found out that it was the ground wire, if we disconnect it, it will boot, but if we connect it back to the modchip the it will not boot. We have even tried a different power point, but all that did was cause the XBox to boot up, flash red and green then immediately cut off. Any ideas guys ?
__________________
V7 NTSC U/C PS2 With Matrix Infinity NTSC U/C V1.5 XBox With Xecuter 2.6 V12 Slimline PSTwo With Matrix Infinity 1.54 Firmware. Custom Built AMD Athlon 64 3500+ 2.21 Ghz 2000 Bus Speed, 200 Gb Sata HDD, Asus A8N SLI-Deluxe Motherboard, Rosewill Nvidia GeForce 6600 GT PCI-E Graphics Card, 1Gb of DDR Dual Channel Ram, NEC DVD-/+ R/RW 3520 Burner, Tsunami Dream Case. J.M.J. |
| Sponsored Links |
|
#2
|
||||
|
||||
|
Check all the solder points.
__________________
[SIZE=1]NTSC Ver1.0 XBox w/ [URL=http://www.gameshopusa.com/]X2.3 Lite[/URL] flashed with X2 4981.06 120GB WD 7200RPM 8mg cache Samsung SDG-605B * All stuffed in a beautiful translucent green case UK PAL Ver1.4 XBox ([i]not chipped yet[/i]) Stock 8gb WD Philips 6035/21 * All stuffed in a beautiful Crystal Clear case[/SIZE] [I]Having a BMW that says “Made in the USA” is like having a Rolls-Royce that says “Made in Japan”[/I] |
|
#3
|
|||
|
|||
|
We did, they are all good. He checked them thoroughly as they were done.
__________________
V7 NTSC U/C PS2 With Matrix Infinity NTSC U/C V1.5 XBox With Xecuter 2.6 V12 Slimline PSTwo With Matrix Infinity 1.54 Firmware. Custom Built AMD Athlon 64 3500+ 2.21 Ghz 2000 Bus Speed, 200 Gb Sata HDD, Asus A8N SLI-Deluxe Motherboard, Rosewill Nvidia GeForce 6600 GT PCI-E Graphics Card, 1Gb of DDR Dual Channel Ram, NEC DVD-/+ R/RW 3520 Burner, Tsunami Dream Case. J.M.J. |
![]() |
|
|