|
#1
13-07-2003, 22:55
|
||||
|
||||
|
My Xbox crapped out
That's right my oh so beautiful xbox has s**t the bed on me. Boots once(red), twice(red/green, then thrice(red/green/red...)On the third boot you hear the HDD wind up a little then wind down, thats all. This has happened after trying to install a bank of swithes for modhip, tsop flashing, tsop selector, front led Hdd indicator. The points used were both sets of jumpers and T1 for tsop flash, A18 and A19 for tsop selector, four points on chameleon switches, and pin39 on IDE and resistor R3V2 for front LED. I have gone over the board several times for solder splashes and found nothing. There is one broken trace for one of the J jumpers for TSOP flashing, but it went only to a pad and the xbox worked long after it was missing. If anybody has any advice it would be greatly appreciated. In the worst case senerio I am also looking for referrals to a good repair shop.
__________________
Xbox v1.1 120Gb w/Xenium NTSC V7 PS2 somewhere in Limbo Windows XP, 1.67GHz Athlon, 768 MB JLMS DVD-ROM LTD-166S HP DVD Writer 200i 
|
| Sponsored Links |
|
#2
14-07-2003, 06:37
|
||||
|
||||
|
Can't really help you out much, but here is a good part dealer.
http://www.llamma.com/xbox/parts.htm They are the cheapest I have found. Just know that they don't update that page often, so if it says "In Stock" it might be out of stock. You won't know for sure untill you click on the product leading to its page.
__________________
--v1.0 [COLOR=Gray]case modded[/COLOR] Xbox with a [COLOR=DarkGreen]160gb[/COLOR] HDD upgrade[URL="irc://irc.efnet.net/fileforums"] [/URL]
|
 |
|
|
Linear Mode
