Tocca Race Driver

[DEBBIE 2]

Please can anyone help im trying to back up this game iv looked at every thread but cant find out how no cd crack works fine with original but i cant seem to back game up. Iv got HP 9100I CD WRITER and it always works well can anyone tell be what settings to use on clone cd i can create image using alcohol 120 but it will not let me burn imge back it always fails please can anyone tell me clone settings iv tried reanding with date ticked but it stops loading at 94 percent,

thanks debs

[rigga66]

this is tutorial posted on cdfreaks forum, all credit to pfitz, it works for securom v4 games. BlindWrite 4.25 is recommended, if you can't find it try the cdfreaks forum there is a thread there with links to every version of BW. good luck!


Ut2003 Tutorial How To Backup
here it is, a step-by-step tutorial for backing up ut2003.
blindread/blindwrite latest version is needed. a demo can be
downloaded at www.blindread.com. being a newbie, i spent
several nights after work trying to backup the 3 disk set i
bought for $48. not to mention the 15 cdr's i wasted with
various software and configurations (boy was my girl pissed
since they were hers, i ran out). my son, 3 yrs old, who
believe it or not began playing unreal at 2, cannot get of my
pc !!! after i noticed several scratches on the original disk
1 which is needed everytime to begin the game, so here we go:

Read Portion: Extract the contents of the cd into an image.
(orange arrow from cdrom to disk). When blindread begins
follow and apply the following check marks.

1. make make sure you click on general settings, test cd layer
access, and that the vso driver is used. if prompted to
restart do so, if not go back to main menu.

1.5 next select dump image from cdrom.

2. select your writer from the drop down list

3. check the box with extract subcodes only!!!

4. leave the default location for the image file which would
be in the vso/blindread directory. IMPORTANT!!! also leave the
default name of the disc as the image name ex: UT2003_CD1.

5. make sure #1 NIBBLE is selected ***

6. check the box with adapt speed.

7. i wrote and read at 4x, thats the speed i recommend.

8. check the box with eject disk if you wish

at this point, it will begin to make the image. errors will
occur at the end of the process, around 15 seconds remaining,
dont be alarmed, its ok.

NEXT STEP IS TO MAKE A .BWA FILE

1. start bwabuilder application. (cannot be lauched thru the
desktop icon, but rather by clicking start/all
programs/blindwrite suite/physical cd characteristic dumper).

2. make sure the drive with the disk is selected, set for 4x,
and the default 324800.

3. click start mesure, when complete if not given the option
to save, click on file and save bwa.

4. !!!URGENT!!! when the process is complete, you will be
given the opportunity to save the file, BE SURE TO NAME It THE
SAME AS THE IMAGE ex: UT2003_CD1 and no extension because the
application will give it the .bwa. ALSO IMPORTANT, the file
has to be saved in the same directory where you save the
image.

WRITE PROCESS, YOUR ALMOST DONE!!!

1. lauch blindwrite, turquios colored arrow pointing from HD
to cdrom

2. click start cd writing wizard

3. be sure you writer is selected, on the information tab,
blindwrite will give you information about you drive (max read
speed, max write speed, etc) the application will not allow
you alter any information under that tab.

4. click on advance. !!!URGENT!!! uncheck all the boxes except
DAO pw-it should be the only one with a check mark next to it.


5. i am not sure if your drives characteristics matched mine.
the max read, write, and suggested speed were at 48, the
buffer size was set at 2048, with rewrite at 10. i would
suggest going along with the default settings that blindwrite
suggests!!!

6. locate the image. and click start, it will verify the
image, simply click next when finish.

7. last step, make sure DAO pw mode is selected, at 4x, and
that the box next to USE BWA FILE IF AVAILABLE IS
CHECKED!!!!!!!!!! along with the other two boxes. CLICK GO.
YOUR DONE.

Also, it is recommended that you run your copy from a cdrom or
cdreader-not on writers. Dont ask me why, i read that on the
net and for some reason, it's true. I tried running it on my
writer and it would not start up, just spin. You might try to
use insektor v3 from gameworld.