|
#1
|
|||
|
|||
|
GTA3_game hanging.
I was wondering if anyone has had any problems with gta3 hanging. Although my kids have managed to put a few scratches on the bottom of the disc, as soon as you start to play the game, ie drive the car, the floor/road goes blue, then it says disc error and crashes.
Electronics Boutique don't want to know as they say its down to the disc being scratched,but I am not entirely convinced. Any suggestions would be appreciated. |
| Sponsored Links |
|
#2
|
|||
|
|||
|
it is most probably from the disc being scratched, unless you have similar probs with other games. why don't you think it is because of the scratch?
pretty obvious! |
|
#3
|
|||
|
|||
|
did it work ok before the scratches?
if it did its the scratches sony will replace it (upto 1 year old) but at cost of £20 (well it was £20)
__________________
LIFES A BITCH WITH HELP WE SURVIVE |
|
#4
|
|||
|
|||
|
GTA3 is notorious for this. You'll find a few posts from me and others on this subject. I have concluded that it is badly pressed. You'd have to take it to your local Trading Standards Office in order to have it checked against the ECMA requirement for DVD-R. Or you can download the NERO benchmark program and via a DVD-ROM on your PC put the DVD through its paces. In fact I think I'll do that.
The situation was eased as follows: 1 I cleaned the lens - that got rid of the read error 2 I had the laser recalibrated - that made loading faster 3 I switched to a different PS2 - problem appears to have gone away with that calibration |
![]() |
|
|