|
#1
|
|||
|
|||
|
Is Downgrade of Plextor PX-W1210TA possible!
The followin information is from:
####://www.snumpy.com/~gamecopy/games/gcw_cd-backup.shtml "Plextor PX-W1210TA [12x10x32x] - IDE Use firmware 1.00, 1.01, 1.02 or 1.04 - Newer firmware will not work, downgrade if possible!" I have only been able to go back to 1.05 anything older gives an error message and will not continue. Is there a way around this, does any one know why it wont proceed, will it work with this version? |
| Sponsored Links |
|
#2
|
|||
|
|||
|
nope, you can not downgrade it. You have one of the newer firmwares (1.05 or greater) and once it is in there, it will not let you downgrade below 1.05
I have the Plextor PX-W1210A and I have tried. I am also being told that downgrading the firmware is NOT the solution to the problem of copying Safedisc 2--it is caused by the Sanyo chips used in the Plextor. |
|
#3
|
|||
|
|||
|
At last, there is a person that knows Plextor cannot do SD2 with any firmware!
__________________
Where there is a will, there is a way! |
|
#4
|
|||
|
|||
|
Does it means that there isn't any plextor CDRW that can copy Safedisc2 whatever firmware version it has?
And what about any other protections? Because CDRWIN says that I can't write in RAW mode (I have firmware 1.07). |
|
#5
|
|||
|
|||
|
Your burner is great! It can handle ANYTHING EXCEPT for SD2. It reads it hell fast however! If you want to backup a SD2 protected game, use unsafedisc 2_05_30 in combination with Nero. Send me a mail, if you need any help on using the program!
__________________
Where there is a will, there is a way! |
|
#6
|
|||
|
|||
|
Well i own a plextor 12/10/32a with 1.08
firmware and i could do without any problems a 1:1 copy of no one lives for ever, that uses safedisk 2 protection, and i can play this game on any cd-reader. |
|
#7
|
|||
|
|||
|
You must have copied an already copied CD which was copied using a Philips based recorder.
__________________
Where there is a will, there is a way! |
|
#8
|
|||
|
|||
|
No, i have made a 1:1
copy using my plextor 12/10/32a from the originall game, and i have used firmware version 1.08 (i can not downgrade below 1.05). I own the original game and i just made a copy to test my burner, and i did not have any problems copying it, and the copy works great in all cd readers, not only in my burner. I have only followed clonycd instructions and i used clonecd to make the copy of both disks. |
![]() |
|
|