Need settings to Back up Delta force Land Warrior, please help

[packer]

I know that it is a safedisc 2 game and i have the latest clonecd 2.8.4.2 but the trial only. I have A Sony CRX140E writer which supports raw dao . Does Dao stand for Disc At Once?

What seetings in clone must i use?

[Greendeuce]

Yes DAO stand for "Disc At Once"!!

Greetz

[Mr. B.]

I made a backup without using clone cd. I did the following:
- Download the No-CD/Fixed-Exe from Gamecopyworld
- Install Deltaforce LW (Full Install)
- Copy all files but the two .pff-Files (dflw.pff and terrains.pff, the 2.5GB ones) to a tempdir on the hdd
- Copy the two .pff-Files from the game directory to the tempdir\dfsetup
- Truncate the last 200 MB of the .bik-File in tempdir\dfsetup
- Replace the .exe-Files with the ones from the crack archive

It's a little more work than with the cheap cd copy protections, but it seems to work. And it won't take you 8 hours as it would if you used clone cd.

I know its not a "perfect copy", but who cares? It works, and that's all that matters to me.

[Starchild]

1. DF: Landwarrior CD 1 for 1 copy


Delta Force: Land Warrior
CD COPY Instructions
(CloneCD Version 2.8.3.1)
(LG CD-RW CED9090B Hardware used)
1. Select "Copy CD"

2. "READ" file tab
- Select your burner as the reader
- Read Speed: set to Max
- Read SubChannel Data from Data Tracks checked
- Read SubChannel Data from Audio Tracks checked
- Fast Error Skip checked (with dialog box options set to their default)
- Intelligent Bad Sector Scanner checked

3. "WRITE" file tab
- Select your burner as the writer
- Write Speed: set to Max (unregistered CloneCD will burn at 2x)
- Don't Repair SubChannel Data unchecked (or shaded out)
- Simulate Writing unchecked
- Burn Proof/Just Link unchecked (or shaded out)
- Perform Laser Power Calibration unchecked
- Wait until Buffers are full unchecked
- Always close last Session checked

4. "GLOBAL" file tab
- File Buffer Settings set to Default

5. Select "Start Disk Copy"

6. When reading is done, eject disk and put in an 80 min CDR for writing

Comments:
You'll notice the progress bars will not load and no estimated time will
show. Time took approximately 2 hours.

i made a succesful copy of this using clone cd and a philips pcrw804.i ticked fast error skip and don't report read errors.read it to my hd at 32speed and burnt it to disk at 8 speed.it works in both disk drives with no crack or anything !!!!!

[CaptainTrips]

Hi,

ok the Sony CRX-140E or any other sony CAN'T burn SD2 protected correctly. Backups won't work, will always hang at startup.
NO, and I repeat NO,NO,NO,NO f***ing "wonder settings" will help you !!!!!! It won't work with Sony writers. Use a cr***, unS******* or buy a new burner.
OK, and now for all settings fetishists: You can leave ALL settings in CloneCD "OFF", except "close last....." and the copy will work 100%!!!!!! if your burner is capable of burning SD2 protection.
To make the readout faster you can check "skip errors..." and "don't report....", but it won't change the data, and won't help burning SD2 correctly. And once for all , people wrote it here on the board 1000000000x of times!!! : the SD2 protection DOENS'T USE SUBCHANNELS !!!!! So it is useless to enable them in CloneC*. Use the "search" link and read some more topics about SD2, before you post stupid settings, which only lead to more coasters and thrash !!!!!!

Cap

[Snake_eyes]

will these settings work for Delta force 2