ASIS: Advanced Simple Installer Script

[KaktoR]

For windows version, I have already explained it here (with a nice table from wikipedia).

https://fileforums.com/showpost.php?...&postcount=349

I will add some help to Settings.ini instead with next update.

[yasitha]

Originally Posted by KaktoR

For windows version, I have already explained it here (with a nice table from wikipedia).

https://fileforums.com/showpost.php?...&postcount=349

I will add some help to Settings.ini instead with next update.

Just the basics is enough.

add all the available options,
then explain one by one how to use them,
that's it..

One other thing..
Update the fist post,
with system requirement issues

[kocchi96x]

Originally Posted by KaktoR

DiskSpan or normal archive? What skin you use?

I ask because diskspan is not compatible with VCL skin (sometimes installer crash)

i do have the installer crash on me with crc and other times believe with error -11 most times its crc i use ultraarc. Also i dont use any skin.

[yasitha]

Originally Posted by kocchi96x

i do have the installer crash on me with crc and other times believe with error -11 most times its crc i use ultraarc.

Use Diskpan Perfect tool...
No Issues...
and No need Records.ini...

[Schabik]

I've got a question about difference between IS_ENCHANCED and IS_UNICODE.


Can I compile this script with INNO Enchanced, even if it requires INNO Unicode. If I can't do it tell me What differance does it make?

[KaktoR]

I have already deleted IS_ENCHANCED in upcoming new version, so you can't compile with InnoEE anymore.

Because I don't want to test around with different versions. New bugs will be in then and I don't want to mess with this things.

However, I could compile a new compiler so you don't have to install Inno Unicode if you have already installed InnoEE.

[KaktoR]

New version added

v7.1.1a
_____________________________________________________
- Removed ISUtils.dll
- Added green indicator if Hardware match the requirement
- Updated BASS Audio Library to v2.4.14.0
- Added some help to Settings.ini

[kocchi96x]

This happens if you partially meet the requirements.

the bottom one i edited the placement just so no overlapping.
also since 7.1.1beta System has been red for anything other then 1000 for windows 10 below versions will show in red and didn't happen in 7.1.0.

Edit: also i had to go to post 468 with your fix their to get CustomMessages.iss, and that one was no different with the image.
also did have another problem for when it was done the finish button wouldn't show and the pause button was more into the picture on finish page, but so far i haven't seen it with the 7.1.1a as of yet.

[KaktoR]

Thanks for info. I will correct this in a hotfix.

Additionaly I will add text if not all requirements are green.

For example if only cpu mhz is below requirement and all other are OK, text says "Your system does partially meet the hardware reuirements" or something like that. Will test something out.

[kocchi96x]

just found out with the new bass.dll im not able to turn the music back on if i turn it off, when i hit the button for "Music: ON" it stays instead of going to "Music: OFF". I put the old dll back in and im able to turn it back on.

[Titeuf]

Hello,
I just applied the fix 7.1.1.a and I have this error message see my picture.
thank you

[kocchi96x]

Originally Posted by Titeuf

Hello,
I just applied the fix 7.1.1.a and I have this error message see my picture.
thank you

download file from Here and get the CustomMessages.iss and copy it over.

[Titeuf]

Originally Posted by kocchi96x

download file from Here and get the CustomMessages.iss and copy it over.

Hello Kocchi96x,
thank you very much

[Kamalxhero]

I have found two problem..
1 system requirement OS Check!
2 Diskpan Not Supported!

1] i change OS to *OS=611 or 621/631
then system check:os Line go to red in windows 10,
but it should be green, right?
cause windows 10 can handle all Previous Os,
To work i have to change
OS=1000 then its OK,
please check that

2] can't Decompress Diskpan Data.bin.001 *** files...
Only Data.Arc can.. can you add Diskpan compatible?

i have setup.bin. 001 files created by Diskpan,
but can't unpack them with ASIS.

It will really helps
if you could do this
If it's possible please add thia option.

Inside:
Settings.ini
[ExtractSettings]

UltraARC=0 (0 off / 1 on)
UAName=Data1.Arc
UASecond=Update1.2.0.arc
UAThird=DLC Pack.arc

Diskspan=1
DPArchName=setup.bin.001
DPSecd=Update6.bin.001
DPThird=Dlc.bin.001

second, third archives is very helpful
If it's possible. pls add those options..

[KaktoR]

For diskspan:
You have to edit Records.ini file

[Record1]
Type=Freearc_Original
Source={src}\Data1.bin.001
Output={app}
Disk=1

Make records.ini internal if you wish to not use it alongside Setup.exe (it will be extracted to %temp% folder then).

For the hardware issue:
I'm about to fix this. Have some brain breaks atm