Game Installer Designer by altef_4

[Inge]

Originally Posted by CipaRus

I can not understand where I set the path the folder and the program will compress. On the first page I have not found that means {app} and {src}. What can stand in place of these variables. -So What is necessary to create the folder and copy the compressed files? or how?
And no one can give a concrete example of filling all link to one page, where again there Conk.

You can use the program only external compression? Or when I want to use an external compression, I did have to use the inside? Because I put everything and he can not find a directory folder, I should squeeze.

https://drive.google.com/file/d/0B0t...ew?usp=sharing

Again. For Internal Compression:
Design your Stuff. Go to Compression Tab, Internal=yes, Choose your Compression type.
Save the Project(!), click Export, then Import and Import the xxxx.db file you have Export before.
now your on compression page. Do all steps the Converter wanted from you (select game and output folder) compile.

External Compression:
Design your Stuff. Go to Compression Tab, External=yes. Add your Data.arc file(s), set
Input: {src}\yourarchive.arc
Output: {app}
extract pcf,jpg recompression sliders=yes
delete input=no
IMPORTANT for correct Installing is to set the percent of total correct!
Ex: 1Data.arc=100%, 2xData.arc=50%, 3xData.arc=33% a.s.o. Don't forget to set the Disk number right!
If you don't do this correct the Installer crashes or Slideshow runs like hell (3 pics in one second)
Save the Project(!), click Export, then Import and Import the xxxx.db file you have Export before.
select Output for setup.exe and data.db. Do this next to your external compress files. Install your game!

Sounds harder than it is but it's no Problem.

PS: Freearc+Precomp is NOT working! Only all Freearc types (tested -m0 till -m8) and Freearc+LZMA+Srep. UltraArc is NOT Compatible!!!