Dragon Age Inquisition 3dvd9 to 6dvd5

[castelothes]

Based on Installer Creator 2.8 by Razor 12911
.bat file and compression method by Peterf1999 and Fabioddq
Tested on: Win7 Ultimate 64bit

Final Size :
- DVD1 = 3.59 Gb
- DVD2 = 4.10 Gb
- DVD3 = 3.97 Gb
- DVD4 = 3.97 Gb
- DVD5 = 3.98 Gb
- DVD6 = 3.92 Gb

Instruction :
1. Install the game and download and extract the attachments somewhere on your computer, NOT in the game installation directory.

2. Delete folder bonus soundtrack

3. Start Compress.bat, wait for it to compile (4 Hours)

4. move Make ISO file and test before burning

Installation : Disk1 - Disk2 - Disk3 - Disk4 - Disk5 - Disk6 - Disk1 (~45 minute)

[lumaia1950]

installed game hard disk = 30.8 GB
conversion DAI_1 =
Data1.cab = 279,506 KB
Data2.cab = 8,678,584 KB

Error???

[castelothes]

multi9 version you have? look the following folders



my version is English only, sorry

[lumaia1950]

Yes, multi

- Deleted: de.sb / de.toc
- Deleted :fr.sb / fr.toc

Conversion 100%
Disk 1 = 3,77 GB
Disk 2 = 4,10 GB
Disk 3 = 3,96 GB
Disk 4 = 3,97 GB
Disk 5 = 3,98 GB
Disk 6 = 3,93 GB

Install/Unistall = 100%

Thanks

[dar29]

I have a problem.
Convertion is done without problems, and the dvds are ok.
When I launch installation from desktop, after 1st dvd, it asks dvd2, I change destionation folder from DAI_1 to DAI_2 but installation does not continue. During this message, if I put Data3.cab in dvd1 and leave the destination folder in DAI_1, installation continue!!! Why Data3.cab is in the dvd2 and setup can't find it?

[pakrat2k2]

make ISO's then test install

[dar29]

Originally Posted by pakrat2k2

make ISO's then test install

Yes, it works now.
thanx

[gcgameshop]

plss help me repak to 18gb

p/s: sorry my english bad breath

[castelothes]

Originally Posted by gcgameshop

plss help me repak to 18gb

p/s: sorry my english bad breath

what do you mean?

[GODZYLLA]

I think you can easily set -m0 compression across all cabs and cut the conversion time significantly.

I included the Bonus folder and ended up with 5.18GB in Disc1 (I'm not burning it on a disc anyway), but if my calculations are right you shouldn't go over a DVD5 without the Bonus folder which is around 980MB (the files from cabs 1, 2, 8 are 4.22GB uncompressed).

Bottom line is, give it a try without any compression, it's not worth it to save some disc space on each disc at the expense of a 4 hour conversion.

//Oh, I understand For me space is not a problem, but time is

[castelothes]

Originally Posted by GODZYLLA

I think you can easily set -m0 compression across all cabs and cut the conversion time significantly.

I included the Bonus folder and ended up with 5.18GB in Disc1 (I'm not burning it on a disc anyway), but if my calculations are right you shouldn't go over a DVD5 without the Bonus folder which is around 980MB (the files from cabs 1, 2, 8 are 4.22GB uncompressed).

Bottom line is, give it a try without any compression, it's not worth it to save some disc space on each disc at the expense of a 4 hour conversion.

it is true, but first I make this conversion for myself, because my drive is already very narrow so 1GB is also very valuable. But I think I made the design installer takes a long time, unfortunately if I use it for myself.

[csfile]

Is it somehow possible to cut anything else or compress a bit more to get ~400 mb less to fit it in a bdr?

Thank in advance!

[farhad-sj]

Error...
My Version Game Delux Edition

[csfile]

Looks like at the time of error you didn't have enough free Ram to proceed to the next compression step. Usually you must have about 2GB unused for Freearc on maximum compression.

[peteka]

Originally Posted by farhad-sj

Error...
My Version Game Delux Edition

edit the compress.bat and replace this parameters
arc a -ep1 -r -w.\ -msrep+lzma:a1:mfbt4:d256m:fb128:mc1000:lc8 for this lc4 -ld4 in the all lines