FarCry 3 - 2xDVD5 [ONE LANG + LZMA + INNO SETUP]

[vasu001]

Originally Posted by pakrat2k2

this is the 2dvd5 conversion, so probably same as 3dvd5 conversion without having to remove files.

so what u r sying is that i copy support to dvd3 folder and after conversion it is not even necessary....

[pakrat2k2]

no, run the conversion & see how many setup*.bin files you end up with. This topic is the 2dvd version & MAYBE rev0 just uploaded the same base files ( with 3dvds + support folder ) in wrong folder??

If you end up with setup-2X.bin files & no setup3X.bin files then you know the support folder has to be in dvd2 !!

cmon its not that hard to figure out.. just read the steps do what it says, and see what it ends up at. If you end up with setup3* files then the support has to be in 3rd folder, even tho its posted as 2xdvd5.

[vasu001]

Originally Posted by pakrat2k2

no, run the conversion & see how many setup*.bin files you end up with. This topic is the 2dvd version & MAYBE rev0 just uploaded the same base files ( with 3dvds + support folder ) in wrong folder??

If you end up with setup-2X.bin files & no setup3X.bin files then you know the support folder has to be in dvd2 !!

cmon its not that hard to figure out.. just read the steps do what it says, and see what it ends up at. If you end up with setup3* files then the support has to be in 3rd folder, even tho its posted as 2xdvd5.

yeah thats what i think,maybe he had given wrong procedure or posted the wrong base files in attachments?/.

but my computer does conversion usually in about 3-4 hrs so i can't check it just to be sure[also electricity problem is also here-INDIA]........

[REV0]

@vasu,

If you waited until today since 19th, to move support folder from dvd3 to dvd2, that was unnecessary. The reason i separate script and base files is script needs tweaks in general, not base files.

Whatever, i moved support folder to DVD2 and deleted DVD3 folder in base file, next time if there's something like that, you should do this as well.

As a response to my visitor page, 3DVD5 - 2DVD5 threads are identical, only 2dvd5 requires max. 1 lang, therefore it's not multi6.

[aizen27]

Perfect, everything works fine including patch v1.04.
thank you REV0

[Rekac]

Guys, i get this, what now, how to start the conservation ?

[pakrat2k2]

read the steps again, you missed #4. you need to change that to your installed gamefolder
& remove ; from front of line.

[Rekac]

I already done that before i asked



but i dont know what ; to remove?

[pakrat2k2]

sometimes in front of line #define Programfiles...., there is a ; which is same as comment, so you end up with small setup.exe & no bin files.

you've changed it to your gamer folder so now compile the script.

[Rekac]

Originally Posted by pakrat2k2

compile the script.

What that means, what to do?

And sorry for my nooby questions .

[Fabioddq]

Originally Posted by Rekac

What that means, what to do?

And sorry for my nooby questions .

You must have Inno Setup Unicode version installed on you system.

Download here: http://www.jrsoftware.org/download.p...ode.exe?site=1

After install the program, open InstallerScript.iss with Inno Setup off course and press Compile: ctrl + F9.

Follow the instructions of the conversion step by step to succeed.

[Rekac]

Originally Posted by Fabioddq

You must have Inno Setup Unicode version installed on you system.

Download here: http://www.jrsoftware.org/download.p...ode.exe?site=1

After install the program, open InstallerScript.iss with Inno Setup off course and press Compile: ctrl + F9.

Follow the instructions of the conversion step by step to succeed.

Thanx man ! Never heard about that app :P

[Evil Boy]

Hi I have one question like there is no border in Utorun i mean no close,minizie button .Is it also possible to do the same in Installer?

[Theodor]

While monitoring the registry entries executed by this conversion,I found a mistake although I don't think it will affect anything much.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Ubisoft\FarCry 3]
"UninstallString"="C:\\Program Files\\Ubisoft\\FarCry 3\\Uninstall\\unins000.exe"

[HKEY_LOCAL_MACHINE\SOFTWARE\Ubisoft\FarCry 3 ]
"GDFBinary"="C:\\Program Files\\Ubisoft\\FarCry 3\\GDFBinary_en_US.dll"
"GameExplorer"="{32E9A39C-C639-4CDC-A755-B3752FE0702E}}"
"DisplayName"="Medal of Honor™ Warfighter"
"Locale"="en_US"
"Product GUID"="{1040143F-FEFB-4B90-8E51-E47D40E14C4E}}"
"Install Dir"="C:\\Program Files\\Ubisoft\\FarCry 3"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\FarCry 3_is1]
"Inno Setup: Setup Version"="5.5.2 (u)"
"Inno Setup: App Path"="C:\\Program Files\\Ubisoft\\FarCry 3"
"InstallLocation"="C:\\Program Files\\Ubisoft\\FarCry 3\\"
"Inno Setup: Icon Group"="Ubisoft\\FarCry 3"
"Inno Setup: User"="User"
"Inno Setup: Language"="eng"
"DisplayName"="FarCry 3"
"DisplayIcon"="C:\\Program Files\\Ubisoft\\FarCry 3\\bin\\farcry3.exe"
"UninstallString"="\"C:\\Program Files\\Ubisoft\\FarCry 3\\Uninstall\\unins000.exe\""
"QuietUninstallString"="\"C:\\Program Files\\Ubisoft\\FarCry 3\\Uninstall\\unins000.exe\" /SILENT"
"DisplayVersion"="FarCry 3"
"NoModify"=dword:00000001
"NoRepair"=dword:00000001
"InstallDate"="20130206"
"EstimatedSize"=dword:000007b8

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer]
"GlobalAssocChangedCounter"=dword:000001ca

The display name value is Medal of Honour Warfighter instead of FarCry 3.

Btw can this conversion be updated for 1.4 version with respective registry entry !

[REV0]

V1.20 - Regkey Update, compatible with V1.05 update thanks to mikey