HDD if is ide starforge

[bj24]

*******************************************
and one more thing can you send me one photo full
please;;

to see what cables i have to set off( one photo will all the back inside) please;; i you can;;;;
after i will do inplug the cables

do i ahve to go in
Contro Panel/ System/ Hardware/ Device Manager/ CD-DVD drives.

to do uniinstall;;;

my dvd drive is up
and
my dvd recorder is in the second position
**********************
i know that i ahve to to unplg my dvd drives and dvd recorder in my case
but i have one qustion;;

do i have to change my hDD (ide) amd to put him in one card scsi;;

can you help me please;;

[bj24]

starforge checks and ide channels;;;

in this case what i do;;

[Joe Forster/STA]

You need to unplug the IDE data cable (you can unplug the power cable, too, if you want). The IDE data cable is a long, 40- or 80-wire, very wide so-called "ribbon" cable, it goes from the motherboard to IDE devices - hard disks and CD/DVD drives - and it usually has three connectors - one for the motherboard and two for two IDE devices; if you can't find it, ask a friend or go to your local computer shop to show those cables to you.

To make your CD/DVD drives disappear, yes, you could move them from IDE to a SCSI or S-ATA controller. But NOT the CD/DVD drives you already have as IDE, SCSI and S-ATA have completely different connectors!

As for the rest of your post, sorry, I don't understand it...

[bj24]

can you help m,e with this
*************
e as IDE, SCSI and S-ATA have completely different connectors!******To make your CD/DVD drives disappear, yes, you could move them from IDE to a SCSI or S-ATA controller. But NOT the CD/DVD drives you already hav******

i dont understand
if i will unplug the ribbbon will can i play the games which protects
with starforce;;;
and go in the mamager and set off the drives cd and dvds
will can i play the games which protects
with starforce;;;

or i need to move them from IDE to a SCSI or S-ATA controller. But NOT the CD/DVD drives you already have as IDE, SCSI and S-ATA have completely different connectors!;;;;

can you help me please;;

do i need to do this with my drives''';;;
please;;

[bj24]

if i will unplug the ribbbon will can i play the games which protects
with starforce;;;
and go in the mamager and set off the drives cd and dvds

so i dont need nighrmare starforge
and

and i don t need eed to move them from IDE to a SCSI or S-ATA controller.

can you help me please;;

[Joe Forster/STA]

You need to hide your IDE CD/DVD drives; either with Starforce Nightmare and other tools (see the FAQ for the list) or by physically disconnecting them. The latter might be the better solution, as Starforce re-activates IDE CD/DVD drives, unless you have motherboard with nForce chipset. Some say Virtual Drive Pro 10 can also hide CD/DVD drives properly.

If your IDE CD/DVD drives are hidden, THEN you can mount a mini/maxi/full image of the game into Alcohol 120% or Daemon Tools and play. (Starforce will think that the mounted image is actually the original CD.)

[bj24]

but my motherborad is not reforce

so

the best solotion
is to unblug them, plhisicaly;;;
am i corect''':;
so in my case i dont need starforge or viusual drive
becuase my motherborad is nforce

do i ahve wrihgt;;;;
foster;;;;

[bj24]

becuase my motherborad is not nforce

foster;;;
or in my case i have to,,use and nightmare;;;

[Joe Forster/STA]

Try both. (And again, Starforce Nightmare is NOT the only CD/DVD drive hider tool!)

[bj24]

now can i ask you one another quetsion;;;

when i will open my case
i will unplug the ribon from motherboard which is down;;;;

[Joe Forster/STA]

No, unplug the device (CD/DVD drive) only.

By the way, as you're obviously a beginner in PC hardware stuff, I would recommend that you ask a knowledgeable friend (neighbor, school mate etc.) to explain basic things to you. Perhaps, you could try to find a Greek forum if you're having problems with the English language. You may get better results by doing that; by asking such simple questions and waiting for the answer for hours, you will not solve your problem within a year...

[bj24]

can i do one another questiom
when i will open my computer
i will do unplug only the riibon which is down the motherbaoed which conects the dvd drives and dvd rom drives;is not nessasery to unplug the ribbbon from up side which are the dvds and dvd rom;;;

when i will unplug the riibon and do restart can i put the case of my computer;;;
beofore or later;;;

then i have to go in the devise manager for

to unistall the drives
but how can i later after 2 weeks if want to use my dvds and cd s
to install them again;;;
how do i need any cd to install them later because exple ( ALREADY NOW
I WENT AND I DID UNINSTALL THEM HOW CAN I DO ISTALL THEM:;;
when i will be in decision to to put the riibon again which connects
the dvds and cds first i put the riibon and then i do install the drives;;;
soory for all this questions sooory but you must understand me
i am leraning things tthat i didnt know before in past!!!!!!!!!

WHEN I WILL DECIDE TO DO UNPLUG PHISICALY BEFORE I DO

THE COMPUTER MUST BE CLOSED;;;
AND EVERYTHING IS BACK IN THE CASE TO TAKE OFF FOR TO OPEN MY CPU;;;;

[Joe Forster/STA]

If you re-connect the drives, Windows will re-activate them automatically; that's what Plug & Play is for.

[bj24]

From Where Can I Download Virtual Drive Pro;;;
Can You Help Me Please;;

[Joe Forster/STA]

Search on Altavista, Google or your favorite Web search site.