Imperial Glory ...unknown protection...

[Kamasutrance]

Ok the game works fine until battle is involved. When a fight its about to commence its just loads and restarts my pc. Anybody else had a similar problem?

[RazzZoom]

how I got my backup copy 2 work!

install game!

make an image from original

make sure .b5t name is the same as .b5I
copy b5t name 2 the b5i if different to each other

then use Alcohol 120
check RMPS, under emulation is checked
Under Extra Emulation have sub-channel data fixed and emulation checked
in general, allow only 1 copy of alcohol .. burn backup dvd

get antiblaxx-install

restart computer <-a must do

run antiblaxx
in taskbar right click antiblaxx
(if asked for a name use default or rename to your own,default being gamename.)
go to settings
go down to game
find your dvd drive with copied backup
find .exe
use secuRom7
hit close, not exit
right
right click in taskbar antiblaxx
use run game gamename
and the game runs
now you can put your Gamedvd in its box! and use the backup! )

[MiB]

hi razzzoom


i´ve taken the settings you have said above.
all other variations too.

but i got the same error massage i´ve written sometimes before in this thread.

what is wrong?
is there another way to start the game? (like with demo exe or something else?)

thanx

[Benno1999]

Originally Posted by Kamasutrance

Ok the game works fine until battle is involved. When a fight its about to commence its just loads and restarts my pc. Anybody else had a similar problem?

Yeah.. It does the same on my pc.. But in my case i was browsing the quests page..

[Oliwood]

I only followed the install introduction and it runs without any problems

Install txt:

Imperial Glory

1. Use BlindWrite v5.2.16 with Automatic profile to
burn using 4x write speed or lower.
2. Install.
3. Play!

*------------------*

1. Grabar con BlindWrite v5.2.16 con Perfil Automatico a una
velocidad de 4x o menor.
2. Instalar el juego.
3. Jugar!

PCTeam - wxw.pctorrent.com

[Benno1999]

Originally Posted by Oliwood

I only followed the install introduction and it runs without any problems

Install txt:

Imperial Glory

1. Use BlindWrite v5.2.16 with Automatic profile to
burn using 4x write speed or lower.
2. Install.
3. Play!

*------------------*

1. Grabar con BlindWrite v5.2.16 con Perfil Automatico a una
velocidad de 4x o menor.
2. Instalar el juego.
3. Jugar!

PCTeam - wxw.pctorrent.com

Well, great for you.. But i still have the problem with the game restarting suddenly..

[heerofox]

I tried using the ImperialGloryDemo.exe in the actual folder, and it ran the startup graphics (eidoes, pyro, etc) but then the game closed. Dang!

Ive tried everything you guys have said and no dice, keeps saying to insert the original disc.

Edit: This is for everone that cant get it working, FINALLY i got it.
Here's what I did...
At first i tried everything everyone above tried, then tried the demo exe then i uninstalled anti blaxx.

I was bored several hours later and decided to try again. Downlaoded 1.16 Anti Blaxx again, enabled all emulation on Daemon (was already done) but I also enabled ALL OPTIONS (right click, click options) in daemon tools.
I then opened Anti Blaxx, went to Setting and just input the target exe (which i pointed to the exe coming on the image from daemon). No mount image, no nothing else. I didnt even tell anti blaxx where daemon.exe was located. And I hit run game on anti blaxx and was surprised to see eidos pop up. Good luck

[Kamasutrance]

Originally Posted by Benno1999

Yeah.. It does the same on my pc.. But in my case i was browsing the quests page..

I reinstalled it and works fine!

[troyo99]

So do you need to burn the DVD for this to work ????

[Kilbane]

Is there a mini image and did someone knows how to make it

[bjornmmcc]

Here's how I got it to work:

I have latest Alcohol installed with RMPS activated and I don't have Daemon Tools installed. But I installed latest BlindWrite to make a copy of the DVD. I used BlindWrite Tweaker to start BlindWrite and left all of the settings at default. I.e. Autoplay is enabled. (PS I burned at 4X.)

I made a good copy and it worked fine, so I uninstalled BlindWrite. Ahh...but now it doesn't work anymore and I get the Insert Correct Disk Error.

Sooo...I re-installed BlindWrite and now it works. My theory is that you have to have the Patin-Couffin drivers (from BW) installed to get this to work.

Good luck.

[DABhand]

Originally Posted by Oliwood

I only followed the install introduction and it runs without any problems

Install txt:

Imperial Glory

1. Use BlindWrite v5.2.16 with Automatic profile to
burn using 4x write speed or lower.
2. Install.
3. Play!

*------------------*

1. Grabar con BlindWrite v5.2.16 con Perfil Automatico a una
velocidad de 4x o menor.
2. Instalar el juego.
3. Jugar!

PCTeam - wxw.pctorrent.com

Stupid n00bians.

NO WAREZ.

[computernewbie]

I got it to work using thr following ways

1. I have Daemon Tools, Alcohol 120%, Anti-Baxx
2. I have a image of Imperial glory 1st cd with Alcohol 120% image with all options and extra options on.
3. When burning image remember to click on dpm and fast skip errors.
4. Run it on 32x just to be safe.
5. Once you made an image you load it onto Daemon Tools.
6. Check all options on Daemon Tools on and mount the image on device 0.
7. Run Anti-Baxx and right click on it on the right hand bottom corner.
8. Browse for the Daemon exe file and the Alcohol exe.
9. choose securom V.7 and click on Daemon Tools emulation to use it.(you can also use Alcohol but i haven't check it).
10. Click and browse for the Imperial Glory exe file.
11. Make sure you choose device 0 and and browse for the image on the desktop.
12. Also close Daemon Tools and keep emulation options on.
13. Keep Anti-Baxx on and use Iteligent Stealth.
14. Click on Imperial glory exe and it's done.
15. It might not work the first time but you can exit anti-baxx and click on Iteligent Stealth again and click on the exe on the desktop.
16. You have to exit Anti-Baxx everytime you exit Imperial Glory if you want to go in again.


NOTICE*** This guide is for people who bought Imperial Glory legally.
Any question just ask me.

[bjornmmcc]

Here is a No-DVD Patch direct from SecuROM.

I came across this on this thread at MegaGames Forum.

Hope it works for everyone.

[mauzzer]

I'm still getting the cannot validate dvd mssgs.

I don't have any pyshical dvd drives in my pc and I do have 2 virtual ones that I cannot seem to remove.

This also causes problems when reinstalling deamon tools

Can anybody help me out with this one??