DEAD PS2 50004 or Not - Page 2

ottoman · #16 03-12-2003, 22:23

Silver ps2 shouldn't cost any more than black one, in fact my silver version 9 was cheaper than a black version 7 I bought 3 months before.

As for version 9's.....I feel very sorry for the people that have lost theirs after being modded and can understand how they feel but at the end of the day it was a bit of a lottery. My version 9 with M2 is workin fine wiv no problems ( after a few teething probs fitting the m2) so i still tend to think that it was just a bad batch of PS2's that sony will never admit to and some are probably still floatiing around out there and will surface from time to time.

Regards an sympathies to dead ps2 owners.

EVOEvo · #17 03-12-2003, 22:46

Quote:

Originally posted by seaneyb2003
i do seriously think sony done this on purpose messiah or the dms team should get there act together and make there mods better maybe at this point someone should make a nonsolder v9 this would be good as it wouldnt cause the mb to overheat even though u gotta swap still better than frying ur ps2. ps2 buyiers beware when getting a v9 console it might be a nice shiny silver case bit it still aint worth the hassle i know that the black on is v9 as well if someone is gonna say.

They got new v9 no solders here as well as a 3 solder point chip but i dont understand if its a swap or not

http://x-elixis.com/grmods/

seaneyb2003 · #18 04-12-2003, 00:35

Quote:

Originally posted by TylerDurden
Why not just switch cases with a v7 and just sell the old v9 with a v7 case on Ebay? Just make sure you tell people that its a v9.

Oh BTW, @seaneyb2003 whatcha mean mod in training?

Tyler!

ah i donno felt like doin it lol

TylerDurden · #19 04-12-2003, 06:40

@seaneyb2003

Oh its cool man, please go ahead if you want.

Tyler!

dust2dust · #20 04-12-2003, 10:25

"it wrked for 10 mins" my guess is he talks of backups
if so then he had a v9 chip,a v7 1 wouldnt even work for 1 min

jackdor · #21 04-12-2003, 11:33

just swap lids or tops ? what about the ilink hole

jackdor · #22 04-12-2003, 11:41

Quote:

Originally posted by dust2dust
"it wrked for 10 mins" my guess is he talks of backups
if so then he had a v9 chip,a v7 1 wouldnt even work for 1 min

or bad clone there was no 50k on it

seaneyb2003 · #23 04-12-2003, 12:05

Quote:

Originally posted by dust2dust
"it wrked for 10 mins" my guess is he talks of backups
if so then he had a v9 chip,a v7 1 wouldnt even work for 1 min

what do you meen dust.

Tyler No worrys changed it back kk

jackdor · #24 04-12-2003, 13:47

Dusk

DEAD PS2 50004 or Not
Hi
I baught a Magic V for version 9.
I try to install it and the console play for 10 minutes ok.
when i try to put another game inside black screen.
take out the chip everything ok but doesnt reading anything.
eventually i realize that they have send me Magic v not for version 9 because has no stickker 50k on.
Now i have a machine with nothing reading either copy or original
any suggestion what could be the problem that Magic v make on the machine

demetris

now the only thing he says about backups is underlined you must of miss read it. but he dos say wrong chip so he answered is own Q.

dust2dust · #25 05-12-2003, 08:42

he says chipped work for 10mins
worked with origanals from his country ,he not sayiny that
it worked,means backups or imports,v7 chip wont boot for 10 mins on a v9,so he had a v9 chip

fixit what u say now,explain how it worked,if he had a v7 chip?

he says chip has no sticker on it, it cant be a v9 chip the lol
but it worked on a v9 ,
ps only v9 chips work on a v9,u try wiring a non v9 magic5 to a v9,see if it works for 10 mins lol

anyone here with any knowledge will tell u the results

jackdor · #26 05-12-2003, 10:18

Quote:

Originally posted by dust2dust
he says chipped work for 10mins
worked with origanals from his country ,he not sayiny that
it worked,means backups or imports,v7 chip wont boot for 10 mins on a v9,so he had a v9 chip

fixit what u say now,explain how it worked,if he had a v7 chip?

he says chip has no sticker on it, it cant be a v9 chip the lol
but it worked on a v9 ,
ps only v9 chips work on a v9,u try wiring a non v9 magic5 to a v9,see if it works for 10 mins lol

anyone here with any knowledge will tell u the results

it's MR to you

and being you are all knowing you explain there was no sticker on it so may be it fell off or is it one of these clones that are noking about or may just may be he dident get a chance to play a backup game

crazygamelover · #27 05-12-2003, 19:47

never the less a dead v9 or any v. for that matter is definitely a real bummer. hopefully others will steer clear of these if possible, on just not chip them.
Otto does confirm his v9 is all good with that M2, so maybe if this ever comes up again, we should advise newbies to chip with caution, and stay away from Magic chips. EvoEvo also says hes got a v9 getting fitted right now. Curious to hear how he makes out with his... Hopefully his will be Ok.

dust2dust · #28 06-12-2003, 01:51

Quote:

Originally posted by jackdor
it's MR to you and being you are all knowing you explain there was no sticker on it so may be it fell off or is it one of these clones that are noking about or may just may be he dident get a chance to play a backup game

mr lol
so if its a v7 chip how did it work for 10 mins

mr know****all

jackdor · #29 06-12-2003, 04:09

what rattled your cage. now you know i can't go at you on this forum because thay ban me. but come over to ps2newz and i will go at it with you if you want that is

charlie_ps2 · #30 06-12-2003, 09:07

Quote:

Originally posted by nicolpe
Hi
I baught a Magic V for version 9.
I try to install it and the console play for 10 minutes ok.
when i try to put another game inside black screen.
take out the chip everything ok but doesnt reading anything.
eventually i realize that they have send me Magic v not for version 9 because has no stickker 50k on.
Now i have a machine with nothing reading either copy or original.

any suggestion what could be the problem that Magic v make on the machine

demetris

Back to your problem!We need some additional facts.

Exactly what played OK when you first installed the Magic V?
What game and media type gave you black screen?
Without chip, exactly what happens when you put in the original game?

When you de-installed the modchip, was it in the same position? Had it moved? Did any wires appear compressed and touching each other at the base? Are you sure there are no solder bridges on the points you de-installed?