|
Turns out that the guy that installed my modchip put the modchip on top of another chip and when the metal plate was placed back in and the laser assembly and case reassembled it was interfering with the operation of the laser assembly.
I was hearing a clicking sound and when I took it apart I could see where the laser assembly was rubbing on the metal plate.
The chip was moved to an area on the board where it would not interfere and any of the discs i made that were hanging at the logo screen all worked fine now.
A learning experience for me and the guy that installed the chip. It was his first one.
Thx for your replys
__________________
Skypig,,,,,,,,,,,
|
06-03-2002, 12:18
Hybrid Mode
