Peter Pan Return to Never Land
 

I burn an image of this game with cdrWin @ different speeds and when it gets to the black PSX logo screen it just hangs there.

Any ideas, others i've tried were fine but never seen this go so far and then stop like that.

try reading(8x) and writing(2x) at a lower speed, because speed kills.

Hey guys,

Has anyone got a NTSC 2 PAL patch for Peter Pan or knows where to find it?

Thanks in advance,
Tommy

peter pan
 

try pal4u2000 when you have done a image with cdrwin

Turns out that the guy that installed my modchip put the modchip on top of another chip and when the metal plate was placed back in and the laser assembly and case reassembled it was interfering with the operation of the laser assembly.

I was hearing a clicking sound and when I took it apart I could see where the laser assembly was rubbing on the metal plate.

The chip was moved to an area on the board where it would not interfere and any of the discs i made that were hanging at the logo screen all worked fine now.

A learning experience for me and the guy that installed the chip. It was his first one.

Thx for your replys