Toca Race driver 3 won't work with images

[AdHoc]

Hi there !

I bypassed Starforce as mentionned above : using VirtualDrive, tick "Disable IDE CD-ROM" in "Tools", mount with Daemon Tools 4.03HE and just run the game.

BUT, I get a problem when loading a race. Some are working (Professional mode or something like that), but the "Around The World" mode puts me an Austrian circuit on loading screen and then just crashes, back to Windows.

Any idea ?

Thanks in advance

[lazlo_]

It seem that if you only have one h.d and nforce4 the game works ok. The problem seems to be for other nforce users is the raid controller.

Starforce can tell if there's anything on the end of it. No raid, no problem. It works for me fine without unplugging, just disabling pata controller in device manager is all that's required.


Athlon 3800+
Gigabyte ga-k8nxp-sli
160g hitachi sata-2 (jbod)
1 gig corsair xms3200

[alexroma81]

Originally Posted by AdHoc

Hi there !

I bypassed Starforce as mentionned above : using VirtualDrive, tick "Disable IDE CD-ROM" in "Tools", mount with Daemon Tools 4.03HE and just run the game.

BUT, I get a problem when loading a race. Some are working (Professional mode or something like that), but the "Around The World" mode puts me an Austrian circuit on loading screen and then just crashes, back to Windows.

Any idea ?

Thanks in advance

it work fine for me with virtualdrive...

[dsac23]

Originally Posted by alexroma81

it work fine for me with virtualdrive...

What's your system configuration.

That method is system config dependent...

[alexroma81]

Originally Posted by dsac23

What's your system configuration.

That method is system config dependent...

are you sure?

i have amd 64 bit 3200+
1 giga ram
win xp sp1
nvidia 6600 gt
asus a8n-sli...

[Joe Forster/STA]

As expected, it's a motherboard equipped with an nForce (4) chipset.

[INextremo]

You have to unplug any cd/dvd rom drive on your Pc before booting up your system. That's all. VCD Pro10 didn't work for me, neither SF-nightmare.
Specs:
P4 3GH
Abit AI7 motherboard
1GB ram etc.
That's all

[cheesey1984]

I already had the iso, cant remember what I used to make it but heres what worked for me.

disable pata controller in device manager, download the image file from gamecopyworld, mount with latest version of DT... and play. this gave me no trouble at all but maybe im just lucky! heres my setup

-DFI NF4 SLI-DR
-3700 san diego
-OCZ Plat PC3200 rev2
-6200 turbocache (yes I know its poor, had to sell my 66oogt)
-maxtor 200gb sata1 drive (single drive, no raid. Maybe thats why it worked for me)


for all those saying you need to install with the image mounted in DT, just so you know I didnt have DT when I first installed the game. I used MagisISO