TM Sunrise, Starforce 3 Code

[fixbaerchen]

Yo, thank you!
that really helped!!
I'll try it right after I checked my emails

greez baerchen

[fixbaerchen]

when i patch the image, there appears after a while a message saying: "Not supported Sector Size (0 Bytes)"



*edit*
oo.. i'm stupid i've given the image files the wrong names now it works

[fixbaerchen]

sh*t it doesn't works
The patched Image is 553MB big and if I burn it not even the Autoplay starts and if I try to start s.th. manual from the CD it doesn't works, too

[Zulu]

- 553 MB ehm... very strange
When you measure your burnedpatched copy (without sector shift in cfg), which angular differences do you get (the bold ones in my example) ?
Phase3: Step 1: Angle 255 degree = 259-4 (SPR 19.8 = 18.2 deg/sector)
Phase3: Step 2: Angle 353 degree = 348+5 (SPR 20.3 = 17.7 deg/sector)
Phase3: Step 3: Angle 102 degree = 102+0 (SPR 20.8 = 17.3 deg/sector)
Phase3: Step 4: Angle 88 degree = 83+5 (SPR 21.3 = 16.9 deg/sector)
Phase3: Step 5: Angle 223 degree = 225-2 (SPR 21.8 = 16.5 deg/sector)
Phase3: Step 6: Angle 116 degree = 108+8 (SPR 22.3 = 16.2 deg/sector)

- It doesn't work in every drive, but in MUCH more than securom Twinpeak copies do (and like Securom Twinpeak copies you can't e.g. install from such a non-standard CD in every drive)

[fixbaerchen]

OK, here are the angles of the burnedpatched copy:

Phase3: Step 1: Angle 168 degree = 165+3 (SPR 19.9 = 18.1 deg/sector)
Phase3: Step 2: Angle 160 degree = 360+160 (SPR 20.4 = 17.6 deg/sector)
Phase3: Step 3: Angle 143 degree = 259-116 (SPR 20.9 = 17.2 deg/sector)
Phase3: Step 4: Angle 63 degree = 17+46 (SPR 21.4 = 16.8 deg/sector)
Phase3: Step 5: Angle 329 degree = 146-177 (SPR 21.9 = 16.5 deg/sector)
Phase3: Step 6: Angle 333 degree = 300+33 (SPR 22.3 = 16.1 deg/sector)

I think the angular differences don't look like yours

*edit*
oh sorry, that are the values from the image because I just remarked, that the burnedpatched copy don't works at all
So, I think I've done something wrong :P

[Zulu]

In the linked guide you can read:
Starforce has a tolerance of approx. 20°; your Original angles 168, 160... are wrong, too, so it's wrong right from the start, sorry. It seems the drive you've used isn't precise enough; try other speed parameter or another drive

P.S.: I hope you didn't just use the sector shift of the example because it's different for every CD-RW (die Original-Winkelwerte kannst du aber ruhig aus dem Beispiel übernehmen, also den ersten Schritt überspringen)

[fixbaerchen]

Oh no! I've understood just now, that I have to use a CD-RW and not a CD-R. So it couldn't have worked, also if the values were right

*edit*
hmm... I've found a german tutorial, but I get the same solution (the 533MB image )

Maybe that will help you to help me :
That are the steps after which I worked:
1. burn the image (8x, RAW/DAO)

2. execute the *.bat file:
sfcdvd.exe //./F: trackmaniager.txt s24 t5 m0 v0 > track_log.txt

3. I got the track_log.txt:

Phase2: RPM 1472.001 = 40.761 ms (deviation 0.012 ms)
Phase2: SPR 18.426 = 19-3.02%
Phase4: RPM 1285.052 = 46.691 ms (deviation 0.051 ms)
Phase4: SPR 21.290 = 22-3.23%
Phase3: RPM changed by -13.56%
Phase3: Sector shift used: 0 0 0 0 0 0
Phase3: Step 1: Angle 114 degree = 265-151 (SPR 18.9 = 19.0 deg/sector)
Phase3: Step 2: Angle 333 degree = 350-17 (SPR 19.4 = 18.5 deg/sector)
Phase3: Step 3: Angle 253 degree = 95+158 (SPR 19.9 = 18.1 deg/sector)
Phase3: Step 4: Angle 26 degree = 75-49 (SPR 20.4 = 17.7 deg/sector)
Phase3: Step 5: Angle 183 degree = 235-52 (SPR 20.8 = 17.3 deg/sector)
Phase3: Step 6: Angle 338 degree = 120-142 (SPR 21.3 = 16.9 deg/sector)
Phase3: Sector shift recommended: 8 1 11 3 4 9

4. I used the "recommended Sector shift" and got these Angle Values:

Phase2: RPM 1471.946 = 40.762 ms (deviation 0.013 ms)
Phase2: SPR 18.421 = 19-3.05%
Phase4: RPM 1290.233 = 46.503 ms (deviation 0.089 ms)
Phase4: SPR 21.384 = 22-2.80%
Phase3: RPM changed by -13.16%
Phase3: Sector shift used: 8 1 11 3 4 9
Phase3: Step 1: Angle 278 degree = 265+13 (SPR 18.9 = 19.0 deg/sector)
Phase3: Step 2: Angle 346 degree = 350-4 (SPR 19.5 = 18.5 deg/sector)
Phase3: Step 3: Angle 92 degree = 95-3 (SPR 20.0 = 18.0 deg/sector)
Phase3: Step 4: Angle 77 degree = 75+2 (SPR 20.4 = 17.6 deg/sector)
Phase3: Step 5: Angle 227 degree = 235-8 (SPR 20.9 = 17.2 deg/sector)
Phase3: Step 6: Angle 128 degree = 120+8 (SPR 21.4 = 16.8 deg/sector)
Phase3: Sector shift recommended: 7 1 11 3 4 9

5. The differences are under 15 degrees, so patched the image

6. I patch it and get the 533MB image