TM Sunrise, Starforce 3 Code

[Zulu]

Originally Posted by fixbaerchen

- where do I find the values, that I have to put into the cfg?

It's explained in the cdfreaks thread. If you have same SF-key just don't care about that (one needs a buslogger for finding out values).

Originally Posted by fixbaerchen

- what means that: "//./x"? I only understand that I have to rename the Angles.txt to Angles.bat

Open Windows Editor and type in:
sfcdvd.exe //./x: tmsunrise.cfg > Angles.txt
now save that text as whateveryouwant.bat (for x you should use the letter of the drive you are using)

P.S.: - Have you actually downloaded the tools from cdfreaks thread ?
Here you can find a german guide:
http://forum.copybase.ch/index.php?s...ndpost&p=46480

[fixbaerchen]

Yo, thank you!
that really helped!!
I'll try it right after I checked my emails

greez baerchen

[fixbaerchen]

when i patch the image, there appears after a while a message saying: "Not supported Sector Size (0 Bytes)"



*edit*
oo.. i'm stupid i've given the image files the wrong names now it works

[fixbaerchen]

sh*t it doesn't works
The patched Image is 553MB big and if I burn it not even the Autoplay starts and if I try to start s.th. manual from the CD it doesn't works, too

[Zulu]

- 553 MB ehm... very strange
When you measure your burnedpatched copy (without sector shift in cfg), which angular differences do you get (the bold ones in my example) ?
Phase3: Step 1: Angle 255 degree = 259-4 (SPR 19.8 = 18.2 deg/sector)
Phase3: Step 2: Angle 353 degree = 348+5 (SPR 20.3 = 17.7 deg/sector)
Phase3: Step 3: Angle 102 degree = 102+0 (SPR 20.8 = 17.3 deg/sector)
Phase3: Step 4: Angle 88 degree = 83+5 (SPR 21.3 = 16.9 deg/sector)
Phase3: Step 5: Angle 223 degree = 225-2 (SPR 21.8 = 16.5 deg/sector)
Phase3: Step 6: Angle 116 degree = 108+8 (SPR 22.3 = 16.2 deg/sector)

- It doesn't work in every drive, but in MUCH more than securom Twinpeak copies do (and like Securom Twinpeak copies you can't e.g. install from such a non-standard CD in every drive)

[fixbaerchen]

OK, here are the angles of the burnedpatched copy:

Phase3: Step 1: Angle 168 degree = 165+3 (SPR 19.9 = 18.1 deg/sector)
Phase3: Step 2: Angle 160 degree = 360+160 (SPR 20.4 = 17.6 deg/sector)
Phase3: Step 3: Angle 143 degree = 259-116 (SPR 20.9 = 17.2 deg/sector)
Phase3: Step 4: Angle 63 degree = 17+46 (SPR 21.4 = 16.8 deg/sector)
Phase3: Step 5: Angle 329 degree = 146-177 (SPR 21.9 = 16.5 deg/sector)
Phase3: Step 6: Angle 333 degree = 300+33 (SPR 22.3 = 16.1 deg/sector)

I think the angular differences don't look like yours

*edit*
oh sorry, that are the values from the image because I just remarked, that the burnedpatched copy don't works at all
So, I think I've done something wrong :P

[Zulu]

In the linked guide you can read:
Starforce has a tolerance of approx. 20°; your Original angles 168, 160... are wrong, too, so it's wrong right from the start, sorry. It seems the drive you've used isn't precise enough; try other speed parameter or another drive

P.S.: I hope you didn't just use the sector shift of the example because it's different for every CD-RW (die Original-Winkelwerte kannst du aber ruhig aus dem Beispiel übernehmen, also den ersten Schritt überspringen)