Xbit.....Help!

[njayj]

Thanks for the reply's Quall999. However, I am still having some problems with the setup. I have got the x2 4981 (diagram 1 lists the contents). The second 1 lists the configuration of the chip as you stated..

quote: Have every switch off but the first one

You said that when I format the chip, to use configuration 2 (2 1mb slots) as shown in diagram 2. Upon clicking the 'Write' button after selecting the bottom 1mb slot, it says to select a binary file. Which one in diagram 1 do I select? Do i have to add both bin files (1 per slot)?

Also, what does the section in the bottom right part of the Xbit Flash software mean (Bios Selectswitches)?

Sorry, I just need to get everything clear in my head

Look forward to your reply

Thanks

1.


2.


3.

[Quall999]

Get xbtool if you don't have it already. Open a bios in it (Use x2.4981.06 unles you have an upgraded HDD with space on a newly formated G drive). Then, click "1024k" in the group box in the bottem right corner. Click off the animation toggle and edit to whatever colors you want. Then, click the save as button and save it where ever. If the bios works, you will notice those changes.

Now, your switches don't look correct but your xbit app does. Use your 1024k sized bios.

The xbit buttons say "Bios 1" and "1m". Now look at the diagram inb the bottem corner of the app. Under bios 1, it says all the switches are off. You have the first one on still. Before you flash, turn it off and reformat.

Then follow the flash tutorials. Hopefully it will work.