Booyaa! Samsung Drive upgraded.

[Frito]

Yeah, splicing isn't an issue as the small plug end of the yellow cables doesn't get plugged into anything.

You can, use those other wires though, to feed power to the DVD drive. The Pinouts have the power marked so you just need to solder those wires to the posts of the power connector.

I'll try to do an MSPaint of the pinouts for you.

[Frito]

Okay here's the pinout I'm using that works.

I don't trust the voltages other people use cause their're all contradictory. I'm gonna hook the xbox to a multimeter a little later.

This is looking at the end that plugs into the xbox.

[Frito]

Okay finished 'em. The 12v is a little low but still close enough to call it 12V

Here's the new pinout. I'm gonna go ahead and wire 'em up to the molex connecter posts and I'll let you know how it works.

[Frito]

OKay finished wiring the 5's 12's and Grounds. I'm about to plug it in, I'll let you know if it explodes or not.

[Frito]

Okay that didn't work
Damn

Don't do that. :P

[Frito]

So I rewired using pins 1,8,6,13. Drive ejects and stuff like it's supposed to but now I get red/green flashing

Well ****. I'll have to wait till later to work on it.

[infertility]

I'll check back later myself when you have it completed. :-)