|
|
|
#1
23-09-2004, 18:32
|
|||
|
|||
|
lol ok well, i think i just did the most ghetto VIA install anyone has done. one wire stuck to the via no prob, so i connected it to the chip, the rest of the 3 wires. i just stuck it in the whole, slapped electrical tape on it and tested it with a multi meter.
with the multi meter i tested one chip leg point and a point on the matrix, it seems there is full connection. lol. so if i tested the chip leg while the wires are on the vias, and it made a good connection... must mean there is no laquer on mine. 
|
| Sponsored Links |
|
#2
24-09-2004, 13:23
|
||||
|
||||
|
That's gonna cause problems dude, if you can't do them, get someone who can to do them...
__________________
[SIZE=3][COLOR=orange][B][COLOR=blue]PS2, [/COLOR][COLOR=yellowgreen]XBOX[/COLOR] & [COLOR=darkolivegreen]Xbox 360[/COLOR] installs / repairs in [U][COLOR=red]West Yorkshire,[/COLOR][COLOR=red] UK[/COLOR][/U] - [COLOR=#ff0000]Nationwide Service [/COLOR][COLOR=darkorange]-[/COLOR]Please Contact me by PM for more info[/B][/COLOR][/SIZE] :) [B][SIZE=4][COLOR=#ff0000][COLOR=seagreen]360 DVD Drive Fw.[/COLOR] [COLOR=orange]Upgraded/Recovered/Restored -[/COLOR] Bad Flash? No Problem! [COLOR=blue]PM for info[/COLOR][/COLOR][/SIZE][/B] [B][SIZE=4][COLOR=#ff0000][COLOR=yellowgreen]XBOX 360[/COLOR] [COLOR=blue]v1.0[/COLOR] [COLOR=blue]- [/COLOR][/COLOR][COLOR=red]Samsung TS-H943A [COLOR=orange]w/ iXtreme 1.4 Fw.[/COLOR] :D [/COLOR][/SIZE][/B]
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
