can my motherboard be fixed

[AXmichigan]

http://llamma.com/xbox/Repairs/repai...ifted_pads.htm

solderin sucks
go for a non solder chip if u cant solder like a pro

[Quall999]

it can probably be fixed, and fairly easily if you are experiance. Although, that is a pretty messed up board.

Anyways, use that guide. The hardest is finding points to connect though. You might even have to flip the mobo over to get it.

[JiveTurkey]

You did that with a 15W iron?

[noname440]

ok this is the thing i got a non solder mod but it would move so i tried tightning the srew some more then i strip the hole so i thought the only way to get a good connectoin would be to solder wires to the mod and solder them on the motherboard. but i didn't know that you where duppose to use a 15 watt solering iron i used a 30 watt. yaya i know im stupid. a friend of mine has the dirty disck error on his so im going to buy his and use my dvd rom. so would anyone want to buy my motherboard?

[Quall999]

llama.com buys broken xbox's for $50, not matter what shape it is in. You could probably make a little more than that by selling the case, power button assembly, power supply, and controller ports seperately. The mobo will go for maybe 5-15, but you'd probably have to include the HDD to get that much.

[JiveTurkey]

I dont think a 15W difference is really that big a deal but to do that much damage you must have been determined! Actually, I have used 30W with no problems but you just have to be aware and 15 is safer for inexperienced users.

Moral of the story: If you've never soldered, practice on some junk boards instead of making your Xbox one.

At least you gained some valuable experience!

[Quall999]

yah, the 15w vs a 30w shouldn't make a difference here, since they are points on the board that are being soldered to, rather than chips.