|
1 the install
If you are experienced in soldering you should be ok take your time and follow the instructions double check every thing
the use of flux makes it easier to get a good solder joint to the legs of the ic's less time spent with the heat on the better for the chips
2 the neo 2.2
It is likley that after fitting your new chip the console may not play dvd-r this is due to the wear caused to the laser by the 2.2
you may be ok but after a years use i think a new laser may be required they are fairly easy to fit but getting hold of one is not so easy
good luck
|
11-03-2003, 14:10
Hybrid Mode
