Matrix 2 Mod Chip
 

This new chip seems to be rather interesting... (Magic 2, Messiah, Clone w/added features:confused: )

This is a direct copy and paste from the website:

Media:
[OK] DIRECT BOOT PS1 CD-R
[OK] DIRECT BOOT PS1 SILVER
[OK] DIRECT BOOT PS1 ORIGINAL IMPORT
[OK] DIRECT BOOT PS2 CD-R
[OK] DIRECT BOOT PS2 DVD-R
[OK] DIRECT BOOT PS2 DVD SILVER
[OK] DIRECT BOOT PS2 ORIGINAL IMPORT
[OK] DIRECT BOOT EA SPORTS GAMES BACKUP
[OK] DIRECT BOOT EA SPORTS GAMES IMPORT
[OK] DIRECT BOOT MAXPAYNE PROTECTION
[OK] DIRECT BOOT CDR 80 MIN SUPPORT

System:
[OK] PS1 LOGO CONSERVED
[OK] PS2 LOGO CONSERVED

Swap Disc:
[NO NEED]

Installation:
[23] Wires (16 for FAT.MOD)
[NO NEED] of cut track
[NO NEED] of additional components

Hardware Compatibility:
[OK] PAL Support (v3/v4/v5/v6/v7)
[OK] US Support (v1/v2/v3/v4/v5/v6/v7)
[OK] JAP Support (v1/v2/v3/v4/v5/v6/v7)

Video:
[FIXED] Screen Auto-Adjust NTSC/PAL
[FIXED] Green Problem with RGB scart cable
[FIXED] Color Correction for PAL Console

Matrix2 is based on differents codes (dev can be discussed in our Irc Channel). Our main goal is to bring you the best "concentrated chip", and this is exactly what you will get in a few weeks with our "Fatality Mod ;)" Support all Vx on all SCPHxxxxx, Direct boot, Region Free, Macro Off, and more...

So what does everybody think about this one.....:cool:http://www.china-matrix.com/images/puce2.jpg

Even has the same type of boot procedure and PAL V7 limitations:

Operations Procedures:

- Direct boot all PS2 Media (CD/CD-R/DVD/DVD-R/DVD Silver/ Import Original) except for PAL V7 (see below).
- There is a restriction on the Magic 2 v7 applicable to PAL PS2s whereby it can only play PS1 games from the same region as the PS2. So a PAL v7 can only play PAL PS1 games (30002/3/4 are interchangeable in this regard).

With the disk assumed in the tray and the tray closed:

- For PS2 games, power up normally from STANDBY with RESET button. A single tap is required.
- For PS1 games & DVD Movies, power up from STANDBY with RESET button held until the blue EJECT light comes on; then release RESET and the disk will boot.
- Please turn off the PS2 (to standby) before changing Mode (PS1/PS2/DVD)
- For soldering the power and ground wires, please use a thicker cable (22awg=21swg)
- For soldering to the other points, please use 32awg=34swg cable

:cool:

Everybody check out the website: China-Matrix.com :cool:

It does look like magic 2 even on installation diagram.............
The only differant about this chip is the video mode:
Video:
[FIXED] Screen Auto-Adjust NTSC/PAL
[FIXED] Green Problem with RGB scart cable
[FIXED] Color Correction for PAL Console

BG did u try this chip urself?....
It never mantion about supporting AR2/GS but Z point is still there to use......

Very Interesting.





Tyler!

Another Chip, Another Day..Nothing new..

Andex: No I haven't tried the chip... I was doing some reading on another forum and found it... Just though it might be interesting to you guys....:cool: