Go Back   FileForums > Game Backup > Sony PlayStation > PS2 Games

Reply
 
Thread Tools Display Modes
  #1  
Old 29-01-2004, 14:06
brainrecords brainrecords is offline
Junior Member
 
Join Date: Oct 2003
Location: Switzerland
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
brainrecords
Send a message via ICQ to brainrecords
Question I've got this from the net

I've found this method in the net...... could someone look if it works?“

How to burn and play PS2, and PSX games on your PS2 without a modchip”


Welcome! Thank you for ordering the “How to burn and play PS2 (Playstaton 2) games”. In this guide, you will learn the very easy method of making copies of your PS2 and normal Playstation games so that they are playable on the PS2. This guide will provide you with all the information you need to burn PS2 games.
You will need the following things to burn PS2 games:
-a computer with a cdburner
-a blank cd-r (don’t use the re-recordable type a.k.a. cd-rw)
-CDRWIN – The version in this guide is 3.8D
-FireBurner –
-PS2 patcher –
-GameShark 2 for PS2
-the GameShark 2 is available at most stores that sell video games,
a few examples would be Best Buy, Circuit City, or Target. You
want version 1.0 of the GameShark 2. I have heard that all other
versions work, but I have only tested version 1.0. GameShark2
costs about 29.95. Believe me, its worth it!!!
-and a PS2 to play the games.

Burning the PS2
The process of burning ps2 games is easy. It is really only a 3 step process.(read
the game, patch the game, and burn the game.)
1) insert game into cd drive.
2) Open up CDRWIN and click on the extract disk/tracks/sectors button.
3) Your settings should be as follows:
For “extract mode” select disk image/ cue sheet
For “read options” select “raw”
For “error recovery” select “abort”
For “jitter correction” select “auto”
For “subcode analysis” select “auto”
Data Speed and Audio Speed should be the same
For “read retry count” type 0
For “subcode threshold” type 300
Make sure you selected the drive that your PS2 game is in
Make sure you typed in the file name (just type the name of the game) and
Check the directory that you’re putting your file in.
Then just press “start”



If you get an error in the middle of reading the disk that says something like “can’t read sections xxxx-xxxxx of disk”, it is becase the disk is scratched and CDRWIN can’t read it. Try to clean the disk, if that doesn’t work you just have to use a different game (a different copy of the same game)


4) Once CDRWIN is done, click ok and then exit CDRWIN. Open up the
PS2 patcher, select the game file you just created and patch it (make
sure you select the “RAW” option.
4) Close the PS2 patcher, next open up Fireburner. Click on the visual
cue burner button. When you created your .bin file (the game file) in
CDRWIN, a .cue file should have automaticly been created. In that
case, drag and drop the .cue file into the Fireburner window. If the
.cue file was not created, just drag and drop the .bin file into the
Fireburner window. After you have done that, right click (click with
the right side button on your mouse) on your file in the Fireburner
window, and select “Burn/Test burn”.
5) In the options window that appears, select your cdwriter, select your
write speed(doesn’t really matter), and make sure you select “Track at
once (TOA) for the recording method. As for the options on the right side of the options window, make sure only the following are checked:
“eject cd” and “close session”. When you have selected the options, click ok and your PS2 game will burn. That’s all you have to do to burn a game.



Burning a Playstion (PSone) game

1) If you want, you can spend 5 minutes using the same method as above
to burn your playstation game, but its not necessary. For a playstation game (not PS2) all you need to do is use a program that lets you make an “exact copy” or a “backup disk (CDRWIN)” You don’t need any selected options, you just need to start the game on the PS2 the same way you would a PS2 game.




Starting the game on you PS2

1) Now for the fun part (and challenging part the first couple of times)
This may sound a little complicated at first, but after you do it 3 or 4
times, it’s supper easy. First things first, you must remove the front of your game drive on your PS2(not a big deal, it can snap on and off).
2) Now insert your gameshark 2 cd(make sure the gameshark memory
card is in one of the 2 slots, doesn’t matter which one.)
3) In the gameshark options, choose “start game”, then “without”. Your screen should read “Please insert game disk then press X to continue.”
4) Now this part can be trickey for beginners, so I will provide pictures
-the main purpose of this starting method is to open up the PS2 and
swap the gameshark disk with your burned game without the PS2
knowing you did it. DO NOT press the eject button on the PS2!!!
-with the PS2 cd tray cover removed, you will be able to look in and see a while tab inside the PS2. With a credit card (or something like it) gently slide the white tab all the way over to the right, if you did it correctly, this should allow you to manually pull open the PS2 cd tray.
5) Next, take the gameshark disk out of the PS2 and put in your burned
game.
5) Gently push the PS2 cd tray fully back into the PS2 (Don’t press the
eject button).
6) Now you need to slide that white tab all the way back to the left (its
origional position). To do this you get a strong papper clip(needs to be a strong one) stick it into the PS2 on the right side of the white tab and push the tab back to the left.
7) If you pushed the tab all the way back to the left and did every thing
else right, you are ready to play your game. Just press X on your PS2 controler and watch as your burned game loads. ( It may load slower than an original game, depending on the cd-r you are using, I use Verbatim cd-r’s and have no problems.)
__________________
Xbox v 1.0 x-ecuter 2
Xbox v 1.2 virgin unmodded.
Ps2 (pal)
Psone(pal)
Gamecube(modded for Jap and Usa)
Gamecube(pal)
2 Dreamcasts
Sega Saturn(pal)
N 64(pal)
SNES
Laptop(P 4 2GHz)
Destktoo(P 4 2.8GHz HT)
Reply With Quote
Sponsored Links
  #2  
Old 29-01-2004, 14:14
EVOEvo's Avatar
EVOEvo EVOEvo is offline
Banned
 
Join Date: Sep 2003
Location: Middle Earth
Posts: 969
Thanks: 0
Thanked 0 Times in 0 Posts
EVOEvo
lol thats the slide card method that way is crap when playing ps2 games u dont want to go that rout it will tray ur disk tray up in time if u want to go the no mod way go with flip tops they work better then slide cards
Reply With Quote
  #3  
Old 29-01-2004, 14:16
brainrecords brainrecords is offline
Junior Member
 
Join Date: Oct 2003
Location: Switzerland
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
brainrecords
Send a message via ICQ to brainrecords
flip tops???
could you please expalne this to me?

U have to know that i don't know anything about Ps2 and mooding.
__________________
Xbox v 1.0 x-ecuter 2
Xbox v 1.2 virgin unmodded.
Ps2 (pal)
Psone(pal)
Gamecube(modded for Jap and Usa)
Gamecube(pal)
2 Dreamcasts
Sega Saturn(pal)
N 64(pal)
SNES
Laptop(P 4 2GHz)
Destktoo(P 4 2.8GHz HT)
Reply With Quote
  #4  
Old 29-01-2004, 14:55
orion731's Avatar
orion731 orion731 is offline
Die Hard Member
 
Join Date: Jun 2002
Location: Oregon, USA
Posts: 339
Thanks: 0
Thanked 0 Times in 0 Posts
orion731 is on a distinguished road
Send a message via MSN to orion731
I see that you have a Xbox v 1.0 x-ecuter 2. For the PS2 get a REAL modchip....One it won't screw up your PS2 and two, you'll be able to play all of your backups with no hassle. It might cost more now but your be sorry later if you don't do it the right way. Believe me I've spent a lot of money before I figured out the "right way". You'll thank me later.

BTW, the fliptop is basically a hole cut in the top of your ps2 allowing you to swap the game without pulling the ps2 tray out. You won't be able to boot all games and you'll need to patch a lot. Take my advice on getting a REAL chip.
__________________
Sony Playstation 3 :D
Xbox 360
Nintendo Wii
Sony PSP w/ 3.40 OE-a Firmware
Sony Playstation 2 V4 SCPH-30001 W/Apple (Back from the Dead with new laser :D )
HD Loader with a 120 gig Hard drive
Sony PS Two SCPH-75001
(Waiting a Matrix Infinity Install)
Nintendo Gamecube w/Action Replay Max Drive Pro GCOS 1.5 boot method
(Waiting a Qoob Pro Install)
Xbox
N64
PS One
Sega Genesis
SNES
NES

TEMET NOSCE

Last edited by orion731; 29-01-2004 at 14:57.
Reply With Quote
  #5  
Old 29-01-2004, 15:19
brainrecords brainrecords is offline
Junior Member
 
Join Date: Oct 2003
Location: Switzerland
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
brainrecords
Send a message via ICQ to brainrecords
yeah I probably will.... but the prob is here where i live (swizerland) it's soo expensive to mod your ps2. but what can i do with the moded ps2? i mean compared to the moded X-box?
__________________
Xbox v 1.0 x-ecuter 2
Xbox v 1.2 virgin unmodded.
Ps2 (pal)
Psone(pal)
Gamecube(modded for Jap and Usa)
Gamecube(pal)
2 Dreamcasts
Sega Saturn(pal)
N 64(pal)
SNES
Laptop(P 4 2GHz)
Destktoo(P 4 2.8GHz HT)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -7. The time now is 14:25.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2000-2020, FileForums @ https://fileforums.com