#1
|
||||
|
||||
3 Way Compression, Masked Compression
Okay, It's Been a long Time Since i made something for the forum
This Tool set features : 1) FA Next implementation to Inno 2) Eugene Shelwien's 7Zip implementation to Inno 3) Updated Arc with more tools, i removed obsolete Tools. 4) Masks Took a significant Update 5) Added Masks on FA Next and 7zip 6) I rewrote the manual to give directions and basics in depth This Toolset isn't optimal for amount of ram this forum is far mature now to give you ram optimals for each spec - Trial will be your father and Error will be your mother. 7) Inno has been updated to host the new stuff 8) Added Patch_Mod support via xDelta3 and a Secondbar FAQ: Q: Will there be a WPI Inno ?? A: Maybe if you want it, why not. Q: How to use this effectively? A: Data Analysis is the key, whether you like or not !! checking what you deal with will save loads of trouble. Q: Some Compressor failed, What do i do ?? A: I am not responsible for the compressors themselves, i didnt write their codes. Therefore i am not to be blamed for their Malfunction. I am not responsible for your Data loss. Though i will check if you send me a Pic of the problem Q: Will you update this ?? will you Add more to it ?? A: I plan to support it a bit, and i also plan to give a huge pack of toolset, how to transcode via ffmpeg in parallel and how to manipulate xdelta to get your job done. e.g. if you unpack a total war pack file and then pack it with 7zip tar codec you can xdelta it and get small difference like 1 or 4 KILOBYTES. Q: Have you Kept tools from us again?? A: The only tools i have kept from this are: Razor with stdio support which Razor made for me and Reflate which me and Razor made back in 2016! Nothing else Update 1: Calculate MD5 a la Fitgirl You will find the readme.txt inside that will guide you through Update 2: Data Analysis Tool by Razor12911 is Added Update 3: 7Zip Shelwien Patch 1 For Folder Management Update 4: Masked Compression Additions, Multithreaded Precomp V 0.48, Speed Optimized by me, CLS zstd, Multithreaded Razor by CLS Check Readme for more !!
__________________
My projects : Masked Compression, lzma2(xz) on Freearc, Zstd compressor for windows My optimizations : packjpg.exe, zstd, lzham, precomp-dev-0.45. Last edited by panker1992; 19-04-2019 at 19:28. Reason: Update 4 |
The Following 32 Users Say Thank You to panker1992 For This Useful Post: | ||
78372 (20-03-2019), ADMIRAL (04-06-2020), Andu21 (25-03-2019), Behnam2018 (17-02-2020), Carldric Clement (09-04-2019), Celestosapien (04-10-2019), doofoo24 (18-03-2019), drsamonline (13-12-2020), felice2011 (19-03-2019), ffmla (19-03-2019), giothothan (09-05-2019), Grumpy (19-03-2019), Harsh ojha (26-05-2019), hmou1 (29-03-2020), IgorKolesnik (19-03-2019), JRD! (25-03-2019), kassane (17-06-2019), kenzo34 (18-03-2019), knife16 (19-03-2019), L0v3craft (02-05-2019), NickX700K (02-04-2019), oltjon (19-03-2019), PsYcHo_RaGE (27-03-2019), resck (24-03-2019), sathex (27-06-2019), st0rm (19-03-2019), Titeuf (02-04-2019), tnt78 (13-05-2020), Vladislav989 (04-01-2023), vLaDv (18-02-2020), ZAZA4EVER (20-03-2019), zirkhaki (15-04-2019) |
Sponsored Links |
#2
|
||||
|
||||
Your updates are always a great resource, even if some methods have already been developed in your latest work.
Momentarily I abandoned the development and the study on FAN, also being a better compressor in all its points of view, due to the absence of the "-ep/1/2/3" mode for the complete control of the path. Very uncomfortable situation for exctraction of created archives of application or game. Too bad that our Bulat has not given any option, information or explanation about it, to remedy the problem.
__________________
≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈ « I Mediocri Imitano, I Geni Copiano, Dio Crea & Distrugge » (Io Ridefinisco & Perfeziono le Loro Opere Rendendole Uniche) ≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈ « Mediocrities Imitate, Genius Copy, God Creates & Destroys » (I Reconsider & Improve Their Works, Rending Them One And Only) |
#3
|
|||
|
|||
Thanks for the update! Before packing, files are not analyzed for the most efficient compression, but are taken from the list of arc.groups?
where to get the Scanner Zee, which you mention in the manual? Last edited by IgorKolesnik; 19-03-2019 at 02:54. |
#4
|
||||
|
||||
I have added the data analysis tool by my dearest friend Razor12911.
Felice its all about options and handle, if you think you can handle the "new" Fa Next then go ahead, but you will say Arc is damn cool and people are used to work with it, right ??? yeah it has many additions that Fa Next lacks at the moment. My point of view is vast more differential, if you guys don't start using the Next Gen 3 years after release, there is still not an inno that uses FA Next, then how can we motivate Bulat to update this tool ?, how can even hope to see the new srep V5 ?? how can we see FA 0.20 ?? Arc is so complete that devoures the rest of them all, But here i am 20hours++ having 10 manuals to make it as simple as it gets, people must start to go ahead.
__________________
My projects : Masked Compression, lzma2(xz) on Freearc, Zstd compressor for windows My optimizations : packjpg.exe, zstd, lzham, precomp-dev-0.45. |
The Following User Says Thank You to panker1992 For This Useful Post: | ||
Behnam2018 (17-02-2020) |
#5
|
||||
|
||||
The FAN, is my opinion, was born castrated, the concept of a new compressor had to be to get the same FA options with something more and not less. How can this be possible to develop something new in applications or in ISS, if is no the elementary basis and the most common options in FAN.
The situation is as follows, FA'Next 0.11 has stopped since 08/10/2016, there has been no more updates from Bulat, if he does not update his work, none of us here will be able to developing something new with FAN, I think the concept was clear, I think we have publicized it enough with your work and my applications, but I don't think we can go any further. Now it's up to Bulat Ziganshin. I hope you read this post, and convince yourself in a future update for the FAN project, and for all its Fans.
__________________
≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈ « I Mediocri Imitano, I Geni Copiano, Dio Crea & Distrugge » (Io Ridefinisco & Perfeziono le Loro Opere Rendendole Uniche) ≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈≈ « Mediocrities Imitate, Genius Copy, God Creates & Destroys » (I Reconsider & Improve Their Works, Rending Them One And Only) Last edited by felice2011; 20-03-2019 at 10:54. |
The Following 2 Users Say Thank You to felice2011 For This Useful Post: | ||
Behnam2018 (17-02-2020), knife16 (19-03-2019) |
#6
|
||||
|
||||
Quote:
Quote:
__________________
Can't find a Game Conversion? Check the 'Conversion INDEX'
|
#7
|
||||
|
||||
thanks for pointing this out Last this i want is people pointing fingers to me for data loss :P hahahaha
Enjoy Grumps. To Felice, What i want Felice is to motivate maybe a developer who was lost somewhere. But i will say it right here, with or without Bulat Compression will go on. We can't stay with Arc forever, this is why i decided to also include Mr Shelwien's Stuff. My long Plan is to basically remove Arc slowly and painfully from my toolset. i will keep FAN since its a bit Newer.
__________________
My projects : Masked Compression, lzma2(xz) on Freearc, Zstd compressor for windows My optimizations : packjpg.exe, zstd, lzham, precomp-dev-0.45. |
The Following User Says Thank You to panker1992 For This Useful Post: | ||
Grumpy (19-03-2019) |
#8
|
|||
|
|||
3 Way Compression, Masked Compression
(xtool,ztool,lolz,srep) More dead File compression ? More powerful Method ? Computer properties Processor : Intel Core i9 9900K 3.6GHz 5.0GHz 16M Processor 8 Cores up to 5.0 GHz Memory : G.SKILL TridentZ RGB Series 32GB (4x8GB) DDR4 3600MHz SSD : Samsung 500GB 960 EVO NVMe M.2 SSD Last edited by Snake288; 22-03-2019 at 11:48. |
#9
|
|||
|
|||
with large capacity ssd/hdd becoming more and more affordable it's waste of cpu resource to compress games with precompresor...
i just bought 3 HDD 8TB for total 450$ started to convert all of my games to srep+zstd, super fast decompression... |
The Following User Says Thank You to doofoo24 For This Useful Post: | ||
yasitha (24-03-2019) |
#10
|
|||
|
|||
That's one point of view. For some people to try to push the limits of compression ratio is not a waste in any sense, is a reward of some sort.
|
The Following 3 Users Say Thank You to Andu21 For This Useful Post: | ||
#11
|
|||
|
|||
If you specify the path to the folder with the game, the script will check the files before compression for the best result?
|
#12
|
|||
|
|||
when using xtool writes error disk full
Last edited by IgorKolesnik; 26-03-2019 at 02:53. |
#13
|
||||
|
||||
Quote:
|
#14
|
||||
|
||||
Masked Additions v1 added Check Readme if you want more info on those
Enjoy! PS. if you repack <South Park - The Fractured but Whole> then this precomp is what you look for
__________________
My projects : Masked Compression, lzma2(xz) on Freearc, Zstd compressor for windows My optimizations : packjpg.exe, zstd, lzham, precomp-dev-0.45. |
The Following 2 Users Say Thank You to panker1992 For This Useful Post: | ||
Carldric Clement (19-04-2019), oltjon (20-04-2019) |
Tags |
7zip, compression, freearc, masks, xdelta |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Masked Compression (Ultimate compression in one go) | panker1992 | Conversion Tutorials | 661 | 13-05-2024 17:51 |
New Fox Kompressor 1.01c Ultimate | felice2011 | Conversion Tutorials | 31 | 07-06-2023 15:58 |
Preprocessing / Optimization / Re compression For Better Compression of Games | Gupta | Software | 14 | 19-10-2022 04:25 |
Ultimate Conversion Compressor (UCC) | vollachr | Conversion Tutorials | 55 | 26-04-2021 10:27 |
M&S_Kompressor By DLG | felice2011 | Conversion Tutorials | 93 | 21-01-2017 09:12 |