Masked Compression (Ultimate compression in one go)

[Prieest]

Originally Posted by panker1992

remove reflate entirely, dont use it at all test precomp and report back


Manual Added everything will be there

Thanks for a manual.
Remove Reflate mean : to remove reflate script from Arc.ini?
How to test with precomp? need to change any script?

[rinaldo]

panker
method ultra no working in bat

[SAM2712]

Thanks for Manual Somehow I need little guide
CPU= fx 8350 (8cores) , RAM (8gb) , win10 x64 , Usage masked compression (latest)
Case 1. When i use 4 cores of cpu then I have to do ( 4 * 200 * 10 = 8gb) B'cos I have 8gb ram but I have cpu fx 8350 So i have to do 4 cores disabled, If I want to use above formula, Right or Not?
Case 2. But If -mmt=on (Default) is used then compression will be done according to cpu cores available I MEAN cpu cores will be increase or decrease during compression , Right or Not?
Case 3. If all cores will be use then acc. to my ram, I have to use ( 8 * 100 * 10 ) Right or not ?
Please look for case 2 mainly beacuse I don't want to disable 4 core In all cases If I explained Right then I can use anyone case
If I mistake any then correct me
In last one thing also what is -mcrc=0 if I change to 1 then crc error never occur , Right or Not

[panker1992]

Originally Posted by SAM2712

Thanks for Manual Somehow I need little guide
CPU= fx 8350 (8cores) , RAM (8gb) , win10 x64 , Usage masked compression (latest)
Case 1. When i use 4 cores of cpu then I have to do ( 4 * 200 * 10 = 8gb) B'cos I have 8gb ram but I have cpu fx 8350 So i have to do 4 cores disabled, If I want to use above formula, Right or Not?
Case 2. But If -mmt=on (Default) is used then compression will be done according to cpu cores available I MEAN cpu cores will be increase or decrease during compression , Right or Not?
Case 3. If all cores will be use then acc. to my ram, I have to use ( 8 * 100 * 10 ) Right or not ?
Please look for case 2 mainly beacuse I don't want to disable 4 core In all cases If I explained Right then I can use anyone case
If I mistake any then correct me
In last one thing also what is -mcrc=0 if I change to 1 then crc error never occur , Right or Not

since you have 8 GB of ram that means that you have left 6 GB because windows taking 2GB to operate,

since you have 8 core cpu then

8 * x *10 = 6 GB of ram because the limiting factor is your RAM

if you want to use all your 8 cores then you need to put dictionary
70mb

then its like 8 * 70 * 10 =5600 MB of ram which is good
for 4 cores 4 * 140 * 10 = 5600 MB of RAM which is good but slower

and mmt=on means it will use all cores mmt=1 = 1 core
mmt=4 4 cores

if you have i7 then its counted as 8 cores so plan accordingly


Priest and Rinaldo, Ultra is reflate, reflate is in the manual

IF you want to have a stable repack use precomp D:

[SAM2712]

Originally Posted by panker1992

since you have 8 GB of ram that means that you have left 6 GB because windows taking 2GB to operate,

since you have 8 core cpu then

8 * x *10 = 6 GB of ram because the limiting factor is your RAM

if you want to use all your 8 cores then you need to put dictionary
70mb

then its like 8 * 70 * 10 =5600 MB of ram which is good
for 4 cores 4 * 140 * 10 = 5600 MB of RAM which is good but slower

and mmt=on means it will use all cores mmt=1 = 1 core
mmt=4 4 cores

if you have i7 then its counted as 8 cores so plan accordingly


Priest and Rinaldo, Ultra is reflate, reflate is in the manual

IF you want to have a stable repack use precomp D:

Oh ! How can I forgot this simple point that I have 6gb is usable
THANKS to clear out my all points ..
Really Appreciate panker
One thing more , If all my 8 cores running then should i have to do with mmt=8 and also Is this effect on (8*x*10)
Simple I mean that In both thing (mmt and 8*x*10) I have to set cores same or different ? If same then no need further explain OR if different then what should I have to change in either things or both

[rinaldo]

I thought it was your oversight .. I do not use these tools, I always say ... because everything else works by changing the method I thought

[panker1992]

-mmt=on will use 8 cores
-mmt=8 will also use 8 cores :P

and yes 8 cores means 8 * dictionary * 10

to make this more confusing

its cores * dictionary * matchfinder

there are a bunch of matchfinders

bt4 uses the multiplier (* 10) this is why we multiply * 10 in the end

you can change the matchfinder and use hc4 for example, but i recommend to use less dictionary than to change matchfinder

i hope you can follow me while i explain all these :P

I had to study compression lecturing under university of Helsinki to understand all that

if i went and wrote that all into manual it wouldnt be a manual i would be a lecture :P

[SAM2712]

Originally Posted by panker1992

-mmt=on will use 8 cores
-mmt=8 will also use 8 cores :P

and yes 8 cores means 8 * dictionary * 10

to make this more confusing

its cores * dictionary * matchfinder

there are a bunch of matchfinders

bt4 uses the multiplier (* 10) this is why we multiply * 10 in the end

you can change the matchfinder and use hc4 for example, but i recommend to use less dictionary than to change matchfinder

i hope you can follow me while i explain all these :P

I had to study compression lecturing under university of Helsinki to understand all that

if i went and wrote that all into manual it wouldnt be a manual i would be a lecture :P

I don't need deep knowledge about these stuffs But I want only required knowledge about compression . So I asked and U helped very well
Now I understand Thanks

[SAM2712]

Compression is going very well with Masks
Now problem arise here
What about this error panker ?

[BLEND2001]

Originally Posted by SAM2712

Compression is going very well with Masks
Now problem arise here
What about this error panker ?

lol i'd met with the same prob! if the app name contains a comma it shows this error!
like Assassin's Creed is the app name then it will show this error!
writing Assassins Creed would fix it

[SAM2712]

Originally Posted by BLEND2001

lol i'd met with the same prob! if the app name contains a comma it shows this error!
like Assassin's Creed is the app name then it will show this error!
writing Assassins Creed would fix it

Very Simple LOL Thanks

[Amsal]

Panker, I just trying to compress file with lzham, it compress well, and when I decompress it then it decompress well, but it leaves a freearc836477383.tmp folder in the installation folder, so can you please tell me that how can I fix that

[panker1992]

Originally Posted by Amsal

Panker, I just trying to compress file with lzham, it compress well, and when I decompress it then it decompress well, but it leaves a freearc836477383.tmp folder in the installation folder, so can you please tell me that how can I fix that

what inno you use and what settings ??

i have tested lzham and it aint giving any freearc temps on me :/ please provide full details on what you do and how you do it

thanks ghost

[The Ghost]

thank you panker for this awesome compressor making repacks now size of my repacks are amazing thank you Thank you thank you

[Amsal]

Using this precomp043+static+xz+lzham+lz77, I am using blackbox inno

Edit: got the same problem with -max also