Prince Of Persia - The Two Thrones-USE THIS THREAD, Do NOT START another Thread!

[DeVincent]

Can you specify your problems clearly? Does it happen when you try to install the game? How much free space do you have left in the partition you are trying to install the game to?

[DABhand]

Originally Posted by pro_kash2005

i have buyied this game today in 3cd ,after copying all file i extract them to file but when it completes 96% it says there is not enough disk space though i have 120 GB SATA and the drive is free of space anyone can help me pls?

Extract them?

Is your game an original?

[KasaK]

That is correct, it only works if you disconect all cd rom drives.

It is working fine in my computer.

[PrOzAk]

http://fileforums.com/showthread.php?t=74450

[DABhand]

That was a silly post.

[nINJAkECIL]

I play PoP:T2T too, and I play it without removing my IDE cables or power cables from my DVD-RW drives. I use Alcohol 120% and DT4 too. maybe this trick would work.
First, make an image of the PoP game using alcohol 120% with an option of starforce protection, and then mount the image using alcohol 120% and then install the game. so the original game is only use for making an image. after installation is complete, shut down your system, remove all optical drives from your system, and then start up your PC. make sure that you haven't type the serial number of the game yet. disable all alcohol 120% virtual drive and start using DT4. make a DT4 virtual drive and mount the image. and then the game ask for a serial number, type it..and that's it. I play PoP:T2T with my optical drive still plugged into my system.
just for reference, my system consist of:
Athlon 64 2800+,512mb RAM,Albatron K8X250Gb Pro (nForce 3 chipset),SATA HD (Seagate 80gb 7200),Ati Radeon 9550,Lite-On DVD-RW.
I hope this trick would work for all of you.
Thanks...and fuck off starforce!!!

[LoedD]

U can play without unplugging cuz your mainboard has n-force chipset.
I don't know exactly but with n-force 4 and 3 you can play any starforce game without unplugging.
Damn I got VIA KT 400

[rkwpk]

Now guys, I have seen every one who have a NF3 chipset based mother board, doesnt require to unplug the optical drives if he or she wants to play through DT. Can anybody confirm this. I have got NF4 and it doesnt work with me either.

[Oblivion]

I see people din't start a new thread! I think i need to just use my cd cos dis in't working..

[vtrix]

first and foremost..the use of starforce nightmare is not required..
follow these steps
1. remove the power cables of ur optical drives(CDROM,DVDROM etc..).
2. start ur pc and load the image into the daemon virtual drive.
3. select all options under 'emulation'.
4. run the game.

if it shows an error that the 'cd key doesnt match with the cd in the drive', then all u have 2 do is to unmount the image from daemon, and exit daemon altogether.
then start daemon again and follow the steps above..

the game usually runs after u follow the steps above and in the worst case scenario will not take more than 3 trails to start...

I REPEAT ONCE AGAIN...STARFORCE NIGHTMARE IS NOT REQUIRED

[Joe Forster/STA]

@vtrix: Your mini guide is covered by the FAQ.

[Faraz_Hayat]

By using starforce nightmare though I have surpassed the image problem yet, the image which I load , according to starforce, doesnot correspond to the serial number. However the game runs fine when i try to open it with the original copy.
This image I have created using Alcohol from the original disc.

[RoNi*[email protected]>]

Finaly,is there any way to play this game without the original dvd or not??Plz someone answer this simple question/..

[acal3000]

Originally Posted by RoNi*[email protected]>

Finaly,is there any way to play this game without the original dvd or not??Plz someone answer this simple question/..

No

[josetratejosetrate]

exist any copy solution of pop t2t?
someone is playing the game without disconect the cables?