Masked Compression (Ultimate compression in one go)

[Razor12911]

i've been wanting to raise this question, why are you using srep and rep, one of them is one, rep is only good for anything less than 1gb, but anything above, you start seeing difference is size, secondly, i think rep should be drop out of the method line. Reflate works using 7z.dll, and not 7z.exe, 7z.dll must be 32-bit. Concepts of exe using a dll is the architecture must be the same else errors. Result when using both srep and rep athe same time was bigger by 7kb, and probably compression duration increased as well.

[panker1992]

Razor did it again
thanks for this
so 7z.dll 15.5 edition 32 bit should suffice or i can get the copy of 15.14 latest edition ??

i have 7z.exe to extract xz format and lz77 format (as dictated by arc.ini :external compression)

compression duration is not affected by rep:800mb but it uses 1 gig more ram during the entire process :P

so as by now lets call rep obsolete, so the entire rep+exe is skipped or replaced by the universal exe2 or as bulat call it dispack070

[ramazan19833]

panker1992 HELP

arc a -lc1024 -ld1024 -ep1 -ed -r -hp -pYourpassword -w.\ Data\data1.bin -mmsc+srep64+rep:512+delta+exe+xz/$bink:zm+zstd/$void=srep64+zstd/$text=srep64+zpaq/$precomp=precomp+msc+srep64+rep:512+delta+exe+lz77 "C:\Max Payne 3\*"

Eror : disk full eror help

[panker1992]

how much ram you have ??

you need to optimize it for your ram post your RAM

and i will do it for you

[ramazan19833]

[ramazan19833]

I WOULD THANKS IN ADVANCE

panker1992

[panker1992]

Code :

[External compressor:xz]
header = 0
packcmd = xz a -txz -an -mcrc=0 -m1=lzma2:d600m:fb=273:mf=bt4:mc=1000000:lc=4:lp=0 -mmt=4 -mx9 -si -so <stdin> <stdout>
unpackcmd = dec x -txz -an -y -si -so <stdin> <stdout>

[External compressor:lz77]
header = 0
packcmd = 7z a -txz -an -mcrc=0 -m1=lzma2:d1200m:fb=273:mf=bt4:mc=1000000:lc=4:lp=0 -mmt=2 -mx9 -si -so <stdin> <stdout>
unpackcmd = dec x -txz -an -y -si -so <stdin> <stdout>


Change these settings in arc.ini and let shine :D hope ti works

[panker1992]

Originally Posted by panker1992

Code :

[External compressor:xz]
header = 0
packcmd = 7z a -txz -an -mcrc=0 -m1=lzma2:d600m:fb=273:mf=bt4:mc=1000000:lc=4:lp=0 -mmt=4 -mx9 -si -so <stdin> <stdout>
unpackcmd = dec x -txz -an -y -si -so <stdin> <stdout>

[External compressor:lz77]
header = 0
packcmd = 7z a -txz -an -mcrc=0 -m1=lzma2:d1200m:fb=273:mf=bt4:mc=1000000:lc=4:lp=0 -mmt=2 -mx9 -si -so <stdin> <stdout>
unpackcmd = dec x -txz -an -y -si -so <stdin> <stdout>


Change these settings in arc.ini and let shine hope ti works

my mistake sorry :P copy this

[ramazan19833]

@echo off
color 0c
Title Compressor - by Panker1992
echo. ************************************************** ************************
echo. * External Options for Compressor By Panker1992 *
echo. * lzma2=4x4:lzma:a1:mfbt4:d256m:fb273:mc1000:lc8 (alt) *
echo. * Mask1: $jpgsolid=jpg+zstd/$void=srep64+zstd/$text=srep64+zpaq *
echo. * Mask2: $precomp=reflate+precomp+msc+srep64+rep:512+delta+ exe+xz *
echo. * Mask3: $bink=zm+zstd *
echo. * Old: $text=dict:128m+lzp:64m:105:d1m:s32:h22+ppmd:12: 192m *
echo. ************************************************** ************************
pause
@echo Recompressing Data...
arc a -lc1024 -ld1024 -ep1 -ed -r -hp -pYourpassword -w.\ Data\data1.bin -mmsc+srep64+rep:512+delta+exe+xz/$jpgsolid=jpg+zstd/$void=srep64+zstd/$text=srep64+zpaq/$precomp=precomp+msc+srep64+rep:512+delta+exe+lz77 "C:\Program Files (x86)\Adobe\*"
echo ************************************************** *****************************
echo.
echo Compressing is Completed
echo.
echo ************************************************** *****************************
pause

[ramazan19833]

[External compressor:nz]
;options a) -cc=best -cO=optimal -cDP=fast b) -m6g -nm c) -p3 = cores
packcmd = nz a -cc -m1700m -p2 -t0 -br128m -bw128m -r -v $$arcpackedfile$$.tmp.nz $$arcdatafile$$.tmp
unpackcmd = nz x -m512g -t0 -p0 $$arcpackedfile$$.tmp.nz $$arcdatafile$$.tmp
datafile = $$arcdatafile$$.tmp
packedfile = $$arcpackedfile$$.tmp.nz

[External compressor:srep64]
;options = l%d (minimal match length, default=512)
header = 0
packcmd = srep64 {options} -m3f -d1g -a2 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = srep64 -d -s -- <stdin> <stdout>

[External compressor:xz]
header = 0
packcmd = xz a -txz -an -mcrc=0 -m1=lzma2:d600m:fb=273:mf=bt4:mc=1000000:lc=4:lp=0 -mmt=4 -mx9 -si -so <stdin> <stdout>
unpackcmd = dec x -txz -an -y -si -so <stdin> <stdout>

[External compressorrecomp]
header = 0
packcmd = precomp -intense0 -c- -t-j {options} -o$$arcpackedfile$$.tmp $$arcdatafile$$.tmp
unpackcmd = precomp -o$$arcdatafile$$.tmp -r $$arcpackedfile$$.tmp

[External compressor:msc]
;Alt: c -v -f Forced //-frog=9 use this instead of -tak=9
header = 0
packcmd = MSC c -v -wav=1 -raw=1 -bmp=1 -ddsraw=1 -ddsdxt=1 -mp3=1 -bmf=9s -tak=9 -dxt=1 -lzma=hc4,lc8,lp2,pb2,fb273,mc1000 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp

[External compressor:lzham]
packcmd = lzham -m4 -d29 c $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = lzham -c d $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

[External compressor:reflate]
header = 0
packcmd = reflate -process $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = reflate -restore123 $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

[External compressor:zstd]
header = 0
packcmd = zstd -f -8 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = zstd -d -f <stdin> <stdout>

[External compressor:rep,lzma,4x4,delta,exe]

header = 0

packcmd = fazip -i0 compress:{compressor}{ption} <stdin> <stdout>

unpackcmd = fazip -i0 decompress:{compressor}{ption} <stdin> <stdout>


[External compressor:jpg]
mem = 10
packcmd = packjpg -np $$arcdatafile$$.jpg
unpackcmd = packjpg -np $$arcdatafile$$.pjg
datafile = $$arcdatafile$$.jpg
packedfile = $$arcdatafile$$.pjg
solid = 0

[External compressor:zpaq]
;-method s4.3ci1 -method 46,36,26
packcmd = zpaq64.exe a $$arcpackedfile$$.tmp $$arcdatafile$$.tmp -method 46,36,26
unpackcmd = zpaq64.exe x $$arcpackedfile$$.tmp $$arcdatafile$$.tmp -summary
datafile = $$arcdatafile$$.tmp
packedfile = $$arcpackedfile$$.tmp

[External compressor:lz77]
header = 0
packcmd = 7z a -txz -an -mcrc=0 -m1=lzma2:d1200m:fb=273:mf=bt4:mc=1000000:lc=4:lp=0 -mmt=2 -mx9 -si -so <stdin> <stdout>
unpackcmd = dec x -txz -an -y -si -so <stdin> <stdout>

[panker1992]

-mprecomp+msc+srep64+delta+exe+lz77/$jpgsolid=jpg+zstd/$void=srep64+zstd/$text=srep64+nz

Use this, its more universal Windows 10 i saw above .... hmm i love troubleshooting

[ramazan19833]

Advanced-Data-Comp.bat

@echo off
color 0c
Title Compressor - by Panker1992
echo. ************************************************** ************************
echo. * External Options for Compressor By Panker1992 *
echo. * lzma2=4x4:lzma:a1:mfbt4:d256m:fb273:mc1000:lc8 (alt) *
echo. * Mask1: $jpgsolid=jpg+zstd/$void=srep64+zstd/$text=srep64+zpaq *
echo. * Mask2: $precomp=reflate+precomp+msc+srep64+rep:512+delta+ exe+xz *
echo. * Mask3: $bink=zm+zstd *
echo. * Old: $text=dict:128m+lzp:64m:105:d1m:s32:h22+ppmd:12: 192m *
echo. ************************************************** ************************
pause
@echo Recompressing Data...
arc a -lc1024 -ld1024 -ep1 -ed -r -hp -pYourpassword -w.\ Data\data1.bin -mmsc+srep64+rep:512+delta+exe+xz/$bink:zm+zstd/$void=srep64+zstd/$text=srep64+zpaq/$precomp=precomp+msc+srep64+rep:512+delta+exe+lz77 "C:\Max Payne 3\*"
echo ************************************************** *****************************
echo.
echo Compressing is Completed
echo.
echo ************************************************** *****************************

arc.ini

[External compressor:nz]
;options a) -cc=best -cO=optimal -cDP=fast b) -m6g -nm c) -p3 = cores
packcmd = nz a -cc -m1700m -p2 -t0 -br128m -bw128m -r -v $$arcpackedfile$$.tmp.nz $$arcdatafile$$.tmp
unpackcmd = nz x -m512g -t0 -p0 $$arcpackedfile$$.tmp.nz $$arcdatafile$$.tmp
datafile = $$arcdatafile$$.tmp
packedfile = $$arcpackedfile$$.tmp.nz

[External compressor:srep64]
;options = l%d (minimal match length, default=512)
header = 0
packcmd = srep64 {options} -m3f -d1g -a2 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = srep64 -d -s -- <stdin> <stdout>

[External compressor:xz]
header = 0
packcmd = 7z a -txz -an -mcrc=0 -m1=lzma2:d600m:fb=273:mf=bt4:mc=1000000:lc=4:lp=0 -mmt=4 -mx9 -si -so <stdin> <stdout>
unpackcmd = dec x -txz -an -y -si -so <stdin> <stdout>

[External compressorrecomp]
header = 0
packcmd = precomp -intense0 -c- -t-j {options} -o$$arcpackedfile$$.tmp $$arcdatafile$$.tmp
unpackcmd = precomp -o$$arcdatafile$$.tmp -r $$arcpackedfile$$.tmp

[External compressor:msc]
;Alt: c -v -f Forced //-frog=9 use this instead of -tak=9
header = 0
packcmd = MSC c -v -wav=1 -raw=1 -bmp=1 -ddsraw=1 -ddsdxt=1 -mp3=1 -bmf=9s -tak=9 -dxt=1 -lzma=hc4,lc8,lp2,pb2,fb273,mc1000 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp

[External compressor:lzham]
packcmd = lzham -m4 -d29 c $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = lzham -c d $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

[External compressor:reflate]
header = 0
packcmd = reflate -process $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = reflate -restore123 $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

[External compressor:zstd]
header = 0
packcmd = zstd -f -8 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = zstd -d -f <stdin> <stdout>

[External compressor:rep,lzma,4x4,delta,exe]

header = 0

packcmd = fazip -i0 compress:{compressor}{ption} <stdin> <stdout>

unpackcmd = fazip -i0 decompress:{compressor}{ption} <stdin> <stdout>


[External compressor:jpg]
mem = 10
packcmd = packjpg -np $$arcdatafile$$.jpg
unpackcmd = packjpg -np $$arcdatafile$$.pjg
datafile = $$arcdatafile$$.jpg
packedfile = $$arcdatafile$$.pjg
solid = 0

[External compressor:zpaq]
;-method s4.3ci1 -method 46,36,26
packcmd = zpaq64.exe a $$arcpackedfile$$.tmp $$arcdatafile$$.tmp -method 46,36,26
unpackcmd = zpaq64.exe x $$arcpackedfile$$.tmp $$arcdatafile$$.tmp -summary
datafile = $$arcdatafile$$.tmp
packedfile = $$arcpackedfile$$.tmp

[External compressor:lz77]
header = 0
packcmd = 7z a -txz -an -mcrc=0 -m1=lzma2:d1200m:fb=273:mf=bt4:mc=1000000:lc=4:lp=0 -mmt=2 -mx9 -si -so <stdin> <stdout>
unpackcmd = dec x -txz -an -y -si -so <stdin> <stdout>

[Rahmani1811]

Panker bro getting this error
Genral (de) compreson error in precomp

[panker1992]

Originally Posted by panker1992

Program Version
7z.exe = 15.12
zstd.exe = 4.5
lzham.exe = 1.1
zpaq64.exe = 7.05
srep64.exe = 3.93
zlib1.dll = use precomp 0.38 no errors better compression use zlib1.dll 105 kilobytes edition works flawlessly


This is all thanks to Razor i couldnt have done without him

Full Support on all Compressors, except reflate its the only one that doesnt work in inno yet

The image on Background i made it quite some time ago using GIMP
hope you like it.

**** Patch 1 download the new scripts use whatever you wish v0.38 or v4.2 precomp

best choice is 0.38 precomp

**** Patch 2 fixed where it didnt properly show the application and the folder wasnt quoted

**** Ripping Decomp v3 fixed decomp error also removed some exe that are not needed for decomp such as msc.exe and pack*.exe since cls-msc.dll exsists

**** Updated Zstd for Windows added 32bit support, this compressor along with 64 bit one pipeline srep and zstd for fast compression and even faster decomp.

Ladies and Gentlemen because i support and i troubleshoot frequently,
i also update my tools regularly or post updates and solutions as they come up
please consider reading them before double posting same problems over and over

Enjoy

Precomp 0.38 Eliminates all errors change from 0.42 please

[Razor12911]

Originally Posted by panker1992

Ladies and Gentlemen because i support and i troubleshoot frequently,
i also update my tools regularly or post updates and solutions as they come up
please consider reading them before double posting same problems over and over

Enjoy

Precomp 0.38 Eliminates all errors change from 0.42 please

people should just work with 0.38, 0.40 and 0.43. 0.42 has a tendency of freezing and 0.41 is the black sheep of all.

And reflate does work in inno, it should work.