|
|
|
#1
29-03-2003, 20:44
|
|||
|
|||
|
Lord Of The Rings
I've read a lot of info on how to make a working copy of Lord of the Rings. I followed Vlulka's faq sheet..... made a ccd image with alcohol120%, then made a mds file with alcohol120%, then I converted the mds file to a bwa with bwa builder, then I used twinpeak to patch the ccd image with the newly created bwa file.
The problem I get is when I got write the patched image to disc I get an error message: No RMPS info in the source, you are not able to make a copy using this datatype! If anyone has successfully done this could you please lend me hand. Cheers 
|
| Sponsored Links |
|
#2
29-03-2003, 20:58
|
||||
|
||||
|
You're on the right way......
Burn the patched CCD-image with CloneCD (newest). If the game don't work try to find another BWA/MDS file for the game on WWW.COPYBASE.DE.VU !!!
__________________
Please read the FileForums [URL="http://www.fileforums.com/showthread.php?t=54193"]BOARD RULES[/URL] and [URL="http://www.fileforums.com/showthread.php?t=73906"]FAQs[/URL]. This post may not be reproduced without prior written permission. Copyright (c) 2000-2008 All rights reserved to makes me feel special. :-) [COLOR=black] [/COLOR]
|
|
#3
29-03-2003, 22:56
|
|||
|
|||
|
I have realised that I was only getting that error message becuase the securom*new profile was already loaded into Alcohol.
However, after proceeding further... I receive another message from Alcohol120% which tells me: Image size does not match to lead-out recorded in TOC it also gives me the following options... *Keep TOC as on source CD, write until end of image file *Modify lead out address to the length of image file *Keep TOC as on source CD, write until Lead Out address is this normal to receive this kind of message? if so which option should I choose?
|
|
#4
30-03-2003, 00:14
|
|||
|
|||
|
I don't know what it is I'm doing wrong, I've followed Vlulka's faq sheet step by step.
I had a look on that site for an alternate bwa file but I can't find Lord Of The Rings anywhere on it. If it were in english maybe I could find it. I went ahead and burnt image to disc and chose the option that says... Keep TOC as on source cd, write to end of image. But the end result is that after it asks for play disc during installation, it cannot find files.
|
|
#5
30-03-2003, 04:39
|
||||
|
||||
|
You can TRY one of the german bwa/mds.
Go to WWW.COPYBASE.DE.VU, click on "Datenbank", click on "D", scroll down to "Der Herr der Ringe".
__________________
Please read the FileForums [URL="http://www.fileforums.com/showthread.php?t=54193"]BOARD RULES[/URL] and [URL="http://www.fileforums.com/showthread.php?t=73906"]FAQs[/URL]. This post may not be reproduced without prior written permission. Copyright (c) 2000-2008 All rights reserved to makes me feel special. :-) [COLOR=black] [/COLOR]
|
|
#6
30-03-2003, 06:02
|
|||
|
|||
|
ok I'll try that....
one thing I wasn't to sure on was when you use Twinpeak to create a patched image one of Vluka's tips was this.... Use Twinpeak v0.2 to patch CCD image with this .bwa characteristic (use twin sector step 15, 6 and 50 if You don't know what to insert there). Now, I wasn't sure how to enter multiple numbers so I entered a space between each one like 15 6 50 Do I need to seperate with commas? Or do I only use one of the three and not all of them?
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
