Go Back   FileForums > Game Backup > Sony PlayStation > PSX Games

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 17-02-2001, 17:11
BorgMDP BorgMDP is offline
Junior Member
 
Join Date: Feb 2001
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
BorgMDP
Send a message via ICQ to BorgMDP
Patching a ANY GAME in a PS ONE With a MODCHIP from MODCHIP.com

I Have a New PS ONE (SCPH-101) with a ModCHIP installed in STANDARD MODE of 4 wires.

I Have also the DIE HARD TRILOGY 2 Original. I've made a Image from CD RWIN everything correct as SAYS in this forum. Then i have patched the game, and this is my question because the back up is not working.

1) I have selected the patch from http://www.psxgamecopyworld.com

what patch do i have to apply to the Image? i mean does any patch who is in gamecopyworld is to break the protection?

2) i Also have only the back up of my Wining eleven 2000, but my original cd died weeks ago, this back up used to work in an old PS with a chip installed, but is not working on this new PS one ,
Can i insert a PATCH in a back up?
Thanks guys.
Reply With Quote
Sponsored Links
  #2  
Old 17-02-2001, 19:31
qwerty
Guest
 
Posts: n/a
For apply the right patch choose the right patch version (PAL-US NTSC-JP NTSC AND OTHER). the same patch will be applied to all the psx-disk.Some patch function in DOS other in windows.
that's all!!

If you have other problems..................write !
Reply With Quote
  #3  
Old 18-02-2001, 00:26
BorgMDP BorgMDP is offline
Junior Member
 
Join Date: Feb 2001
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
BorgMDP
Send a message via ICQ to BorgMDP
Ok I've learned a little bit more about patchs, and for this case, i think i applied the right patch for DIE HARD TRILOGY 2, BUT is not working, i have applied the patch with PPF-O-MATIC v2.0, the file size matched , and sayd the apply was successful, now when i insert the game into my PS ONE with Mod chip of 4 wires, i have the screen. Please Insert A PLAYSTATION DISK (RED SCREEN)...
what the f.. is going on??
i have made NO mistakes on Patching and Copying.

Does the PS ONE (SMALL WHITE ONE) really works with patched games and a mod chip???.
Reply With Quote
  #4  
Old 18-02-2001, 08:12
zuker zuker is offline
Member
 
Join Date: Dec 2000
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
zuker
Quote:
BorgMDP (18-02-2001 08:26):
Ok I've learned a little bit more about patchs, and for this case, i think i applied the right patch for DIE HARD TRILOGY 2, BUT is not working, i have applied the patch with PPF-O-MATIC v2.0, the file size matched , and sayd the apply was successful, now when i insert the game into my PS ONE with Mod chip of 4 wires, i have the screen. Please Insert A PLAYSTATION DISK (RED SCREEN)...
what the f.. is going on??
i have made NO mistakes on Patching and Copying.

Does the PS ONE (SMALL WHITE ONE) really works with patched games and a mod chip???.
You had the same problem I had. I installed one of the modchip.com chips into a friends psone. And it did the same thing. The only way I could get it to work was to take the chip back out and reinstall it. This only worked temporaraly. After shuting off the psone overnight and powering it up the next day, it would do it again. After messing with it for 3 days, I decieded to remove the chip and install one of the new 6 wire stealth chips from modchipz.com. It works great. No patches or boot disc needed.

zuker
Reply With Quote
  #5  
Old 18-02-2001, 17:58
BorgMDP BorgMDP is offline
Junior Member
 
Join Date: Feb 2001
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
BorgMDP
Send a message via ICQ to BorgMDP
Ok GUYS i fixed the PROBLEM.
i had cut 1 of the wires meanwhile i was reensambling the PS One.
I have decided to re open again the PS one and i found 1 cable Cutted.
After Resold the cable again MY PS One Works SMOOTH !!! with all copies
Thanks for the Support.
Right now i have a BRAND NEW PS 2 on my hands~!!! But this... is another HISTORY.
Reply With Quote
  #6  
Old 22-02-2001, 17:34
lazereyes lazereyes is offline
Junior Member
 
Join Date: Feb 2001
Posts: 26
Thanks: 0
Thanked 0 Times in 0 Posts
lazereyes
It sounds like you have two problems.
Firstly I chipped a ps1 with a standard four wire chip. Mine worked fine with backups,but would not work with original games. I got the red screen that you talk about,very strange. After much surfing I found the answer. Most of the 4 wire wiring diagrams appear to be incorrect. Ifinally used the one shown at www.modchips-uk.com which is actually a three wire and one link wire diagram.After this all was well, and I've had no problems scince.

Secondly some patch people alter the boot record (the black playstation logo screen) to incorporate ther name. This part of the boot up image carries the region code,in old psx machines this was not a problem as when chipped the machine bypassed this check. The ps1 checks this segment on all games wether chipped or not,and this being modified tells the playstation that the game is not of an acceptable region,so no boot.
you can get around this two ways firstly use an import player boot disc,or after applying the patch to fix the copy protection then apply aboot up fix for the correct region for your machine.Both these items can be downloaded from the psx utilites pages at megagames.com
Hope this has made things a bit clearer for you.
Enjoy
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -7. The time now is 07:29.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
FileForums @ https://fileforums.com