|
Hi Califb,
The harddrive is probably set as a single master, not dual. If u take the drive out, it should show you the setting for this on the label. Alot of newer drives, mainly Maxtor & Western Digital, use a 10 pin jumper section that configures both a single device & dual devices & u need to set this correctly. Try the manufacturers website for extra guidance.
Seeing as it is a burnproof cd writer, it would not really have made any difference if u slaved it off the original cd-rom drive.
Hope it helps.
|
12-11-2001, 17:49
Hybrid Mode
