FMXInno - Windows Fluent Design Installer UI for Inno

[BLACKFIRE69]

Originally Posted by ADMIRAL

thanks for answer but it's was about metro0 script that you posted

@ADMIRAL,

after making a few changes to the code, you can make it work. however, if i'm correct, there're some aspects in the script that need further implementation. it would be better to ask the authors to complete the script.

Edit1: 

* Replace the current 'ListBoxOnChange' code with this.

procedure ListBoxOnChange(Sender: TObject);
var
  ADir: String;
begin
  if (FMXListBox[2].GetItemIndex > -1) then
  begin
    ADir := FMXEdit[1].GetText;
    StringChange(ADir, ExtractFileDrive(ADir), FMXListBox[2].GetItemText(FMXListBox[2].GetItemIndex));
    FMXLabel[197].Text(MinimizePathName(ADir, WizardForm.DirEdit.Font, WizardForm.DirEdit.Width));
    FMXEdit[1].Text(MinimizePathName(ADir, WizardForm.DirEdit.Font, WizardForm.DirEdit.Width));
    WizardForm.DirEdit.Text:= ADir;

    FMXDiskUsage.SetDir(WizardForm.DirEdit.Text);
    FMXLabel[82].Text(MbOrTb(FMXDiskUsage.FreeSpace, 1));
    FMXLabel[85].Text(MbOrTb(FMXDiskUsage.FreeSpace, 1) + ' is available from the selected drive');
    FMXArc[5].Angle(FMXDiskUsage.FreeSpace, FMXDiskUsage.TotalSpace);
  end;
end;

procedure ListBx3OnChange(Sender: TObject);
var
  ADir: WideString;
begin
  if FMXListBox[3].GetItemIndex > -1 then
  begin
    ADir:= ExtractFileDrive(FMXEdit[1].GetText) + '\' + AddBackslash(FMXListBox[3].GetItemText(FMXListBox[3].GetItemIndex)) + '{#MyAppName}';
    FMXLabel[197].Text(MinimizePathName(ADir, WizardForm.DirEdit.Font, WizardForm.DirEdit.Width));
    FMXEdit[1].Text(MinimizePathName(ADir, WizardForm.DirEdit.Font, WizardForm.DirEdit.Width));
    WizardForm.DirEdit.Text:= ADir;

    FMXDiskUsage.SetDir(WizardForm.DirEdit.Text);
    FMXLabel[82].Text(MbOrTb(FMXDiskUsage.FreeSpace, 1));
    FMXLabel[85].Text(MbOrTb(FMXDiskUsage.FreeSpace, 1) + ' is available from the selected drive');
    FMXArc[5].Angle(FMXDiskUsage.FreeSpace, FMXDiskUsage.TotalSpace);
  end;
end;

Edit2: 

* Comment out the following line in the code.

//FMXEdit[1].OnChange(@ListBoxOnChange);

Edit3: 

* Replace the ListBoxOnChange event with ListBx3OnChange for the FMXListBox[3].

FMXListBox[3].OnChange(@ListBx3OnChange);

.

[ADMIRAL]

Originally Posted by BLACKFIRE69

@ADMIRAL,

after making a few changes to the code, you can make it work. however, if i'm correct, there're some aspects in the script that need further implementation. it would be better to ask the authors to complete the script.

Edit1: 

* Replace the current 'ListBoxOnChange' code with this.

procedure ListBoxOnChange(Sender: TObject);
var
  ADir: String;
begin
  if (FMXListBox[2].GetItemIndex > -1) then
  begin
    ADir := FMXEdit[1].GetText;
    StringChange(ADir, ExtractFileDrive(ADir), FMXListBox[2].GetItemText(FMXListBox[2].GetItemIndex));
    FMXLabel[197].Text(MinimizePathName(ADir, WizardForm.DirEdit.Font, WizardForm.DirEdit.Width));
    FMXEdit[1].Text(MinimizePathName(ADir, WizardForm.DirEdit.Font, WizardForm.DirEdit.Width));
    WizardForm.DirEdit.Text:= ADir;

    FMXDiskUsage.SetDir(WizardForm.DirEdit.Text);
    FMXLabel[82].Text(MbOrTb(FMXDiskUsage.FreeSpace, 1));
    FMXLabel[85].Text(MbOrTb(FMXDiskUsage.FreeSpace, 1) + ' is available from the selected drive');
    FMXArc[5].Angle(FMXDiskUsage.FreeSpace, FMXDiskUsage.TotalSpace);
  end;
end;

procedure ListBx3OnChange(Sender: TObject);
var
  ADir: WideString;
begin
  if FMXListBox[3].GetItemIndex > -1 then
  begin
    ADir:= ExtractFileDrive(FMXEdit[1].GetText) + '\' + AddBackslash(FMXListBox[3].GetItemText(FMXListBox[3].GetItemIndex)) + '{#MyAppName}';
    FMXLabel[197].Text(MinimizePathName(ADir, WizardForm.DirEdit.Font, WizardForm.DirEdit.Width));
    FMXEdit[1].Text(MinimizePathName(ADir, WizardForm.DirEdit.Font, WizardForm.DirEdit.Width));
    WizardForm.DirEdit.Text:= ADir;

    FMXDiskUsage.SetDir(WizardForm.DirEdit.Text);
    FMXLabel[82].Text(MbOrTb(FMXDiskUsage.FreeSpace, 1));
    FMXLabel[85].Text(MbOrTb(FMXDiskUsage.FreeSpace, 1) + ' is available from the selected drive');
    FMXArc[5].Angle(FMXDiskUsage.FreeSpace, FMXDiskUsage.TotalSpace);
  end;
end;

Edit2: 

* Comment out the following line in the code.

//FMXEdit[1].OnChange(@ListBoxOnChange);

Edit3: 

* Replace the ListBoxOnChange event with ListBx3OnChange for the FMXListBox[3].

FMXListBox[3].OnChange(@ListBx3OnChange);

.

Thank you for your quick reply, but even with the edit's codes, I am still facing the same problem. Are there any problems for you with these codes in the script?

[ADMIRAL]

Originally Posted by audiofeel

This part of the code was implemented by @Hitman797. I think that sometimes he will have a free hour and he will fix everything thanks to your edits in the code.
==Here is the latest "clean version" for the changes==

In the first test, my partitions and folders were not displayed at all, and by adding codes, I only encountered errors.

[Masquerade]

Weird... I installed the font to my system and now all is fine
Sorry for the issues! Inno isn't my thing...

[ADMIRAL]

Originally Posted by audiofeel

@ADMIRAL Test whether your directory selection is working correctly now

thanks to you
Yes, it worked this time
The path selection section works correctly, except that it does not show C drive folders for the first time, but the important thing is that the path can be selected.
and add folder button works too.

can you share the iss file?

[Jahan1373]

Everything is great and good, only I saw 2 big problems, one of them did not have the date of the watch
2. When I chose the installation location, it wrote the volume on the image, it wrote the same. 2. There were only problems, thanks for your good script

[hitman797]

Originally Posted by Jahan1373

Everything is great and good, only I saw 2 big problems, one of them did not have the date of the watch
2. When I chose the installation location, it wrote the volume on the image, it wrote the same. 2. There were only problems, thanks for your good script

wait for @BLACKFIRE69 to update the library to add those things.
and you missing the music button and counter app running.

[BLACKFIRE69]

FMXInno - Nov-16 - Hotfix-01

1. Added wGetRunningAppCount on the request of @hitman797.
2. Added missing properties and fixed bugs reported by @audiofeel and @tihiy_don.
3. Some improvements.

i'll update the first article soon.

.

[hitman797]

Originally Posted by BLACKFIRE69

FMXInno - Nov-16 - Hotfix-01

1. Added wGetRunningAppCount on the request of @hitman797.
2. Added missing properties and fixed bugs reported by @audiofeel and @tihiy_don.
3. Some improvements.

i'll update the first article soon.

.

great work, thank you for the update.
if we make GUI to this library that will help the authors to save a lot of time.

for the lock screen

  HeadForm.OnActivate(@OnActivate);
  HeadForm.OnDeactivate(@OnDeactivate);

procedure OnActivate(Event: TNotifyEvent);
procedure OnDeactivate(Event: TNotifyEvent);

[BLACKFIRE69]

Originally Posted by hitman797

for the lock screen

  HeadForm.OnActivate(@OnActivate);
  HeadForm.OnDeactivate(@OnDeactivate);

my apologies; you've requested this before, and though i had it in mind, it appears i forgot about it.

1. Added OnActivate and OnDeactivate events to lockscreen.
2. Added wGetUserCountryName function.

[ADMIRAL]

Originally Posted by audiofeel

@ADMIRAL Test whether your directory selection is working correctly now

Hello audiofeel
As I said before, the test you sent works
Can I have your iss file?

[ADMIRAL]

Originally Posted by audiofeel

This part of the code was implemented by @Hitman797. I think that sometimes he will have a free hour and he will fix everything thanks to your edits in the code.
==Here is the latest "clean version" for the changes==

Again, I tried to change the redirection section similar to the photo by simulating the codes, but again it was useless because the coding method is different in both.