[compressor] FastLZ/6(un)pack

[LeVx]

Originally Posted by soulfit15

btw the error appears when specifying a temp directory actually using -w.\tmp
will try MTX however
thanks

could you also send the input data you used so i can try to rectify the errorlevel

[soulfit15]

i used this in plain arc

arc a bin01.bin "folderpath" -mfstlz -w.\tmp

tried it in MTX 5.0.0.1 keep getting disk size error (which is strange although i made sure that the arc.ini was good.

in MTX 2.0.0.1 however

arc a bin01.bin "folder" -mmtx:c128m:t4:fstlz -w.\tmp

this showed great results near lolz on my tests actually

FreeArc 0.67 (September 13 2014) creating archive: bin01.bin
Compressed 401 files, 2,691,927,339 => 1,142,790,203 bytes. Ratio 42.45%
Compression time: cpu 4.77 sec/real 195.19 sec = 2%. Speed 13.79 mB/s
All OK

[LeVx]

Originally Posted by soulfit15

i used this in plain arc

tried it in MTX 5.0.0.1 keep getting disk size error (which is strange although i made sure that the arc.ini was good.

in MTX 2.0.0.1 however


this showed great results near lolz on my tests actually

,can you tell me how to mtx 2.0.0.1 step by step

[soulfit15]

1) copy 6pack.exe into "cls-mtx v2.0.0.7\Compressor\Bin"

2) added arc.ini lines

3)used the command

another report, I got it to work with MTX 5.0.0.1 but I don't know where is the problem. it showed a worse compression ratio

"arc a bin.bin "folder" -mfstlzx"
FreeArc 0.67 (September 13 2014) creating archive: va.biv
Compressed 401 files, 2,691,927,339 => 1,381,658,252 bytes. Ratio 51.33%
Compression time: cpu 4.22 sec/real 214.48 sec = 2%. Speed 12.55 mB/s
All OK

[LeVx]

Originally Posted by soulfit15

another report, I got it to work with MTX 5.0.0.1 but I don't know where is the problem. it showed a worse compression ratio

im guessing its a bit limit (the exe is a 32bit exe and not 64,so my guess it needs to be ported to 64 bit),and the worse compression ratio is likely correct,but i would test decompression to see if it compressed it correctly

[LeVx]

Originally Posted by soulfit15

another report, I got it to work with MTX 5.0.0.1 but I don't know where is the problem. it showed a worse compression ratio

working on my own 64-bit (though simpiler) impimentation of the fastlz compression libary (to fix it)(and Done

refer to post https://fileforums.com/showthread.php?t=105936