CLS-DiskSpan (UltraARC replacement)

[Razor12911]

Originally Posted by Cesar82

@Razor12911
If possible, look at the attached file.
The native methods of freearc "2", "3", "4", "5" do not work if you include cls diskspan R2/R3.
Or am I setting the command line wrong?
P.S. If I remove the diskspan from the command line it compresses normal.
P.S. The other native methods "0", "1", "9x -ld192m", "x -ld800m", "x -ld1600m" work normally.
Thank you!

have you tried to use other cls other than diskspan to see how it reacts?
1.PNG

2.PNG

3.PNG

the cls by itself...

4.PNG

perhaps this is why I have never mixed default freearc methods with additional methods set by user (-m1..9,x that is)

[Cesar82]

Originally Posted by Razor12911

have you tried to use other cls other than diskspan to see how it reacts?

Do not.
I just tested how I sent the file and realized that from method 2..5 it showed the same error as the third image.
I found it strange to support method 0 and 1 and the others display error.
See the result in the VIDEO of my test using only CLS-DiskSpan.dll + Arc Method

Do you mean that FreeArc does not support combining methods 2 - 5 with CLS?

I wanted to enable users to use these native methods when using diskspan.bat that I changed.
I came to think that it could be some config of the arc.ini that I used so I took Arc.ini and arc.groups directly from the freearc folder and even so when using cls-diskspan it showed errors and without it it does not display an error.
Thanks.

I ran some tests and found that:
If you open a compressed file with FreeArc and go to Info, only with the native method 2..5 it is possible to obtain the combination of the method referring to preset 2..5.


If you include these methods as presets of 2..5 in Arc.ini, the methods are now supported by Cls DiskSpan


Just adding the Arc.ini presets 2..5 makes it possible to support methods using cls-diskspan.

[Compression methods]

2=rep:1kb:256+exe+4x4:tor:1kb:h4kb
3=rep:1kb+exe+delta+4x4:lzma:32kb:fast:32:mc4
4=rep:1kb+exe+delta+4x4:lzma:32kb:normal:16:mc8
5=rep:1kb+exe+delta+4x4:lzma:32kb:normal:32:mc32

After opening the compressed file with FreeArc it is possible to verify that the method was used correctly.