INNO TROUBLESHOOT - Questions Here

[amin fear]

I am getting "unarc.dll error code: -12 check sum error" at first percent/% of my setup decompression phase on SOME windows systems using below XTOOL command :

The decompression goes without error on most systems but on a few systems gives "unarc.dll error code: -12 check sum error" , anybody knows some solution for this ? increasing virtual memory does not help ! the system has 16GB Ram + CPU corei5 ,so the problem is not from computer resources , its very odd

xZLib+srep:m3f+4x4:b128mb:lzma:ultra:64m:bt4:fb273:lc8:mc1000000

[Simorq]

Originally Posted by amin fear

I am getting "unarc.dll error code: -12 check sum error" at first percent/% of my setup decompression phase on SOME windows systems using below XTOOL command :

The decompression goes without error on most systems but on a few systems gives "unarc.dll error code: -12 check sum error" , anybody knows some solution for this ? increasing virtual memory does not help ! the system has 16GB Ram + CPU corei5 ,so the problem is not from computer resources , its very odd

xZLib+srep:m3f+4x4:b128mb:lzma:ultra:64m:bt4:fb273:lc8:mc1000000

Use XTool 12_x86 for Decompression

and Edit CLS.ini

[SREP]
Bufsize=24m
transfer_ReadBufSize=512k
transfer_WriteBufSize=512k
Memory=512m
TempPath=.\

[amin fear]

Originally Posted by Simorq

Use XTool 12_x86 for Decompression

and Edit CLS.ini

[SREP]
Bufsize=24m
transfer_ReadBufSize=512k
transfer_WriteBufSize=512k
Memory=512m
TempPath=.\

Thanks Simorq jan , the following error as i mentioned , resolved by pre-installing Visual C++ 2013 by using below CIU config :

[LauncherSettings]
------------------------------------------------------- 
InstallRedist=1

[Launch1]
Name=Visual C++ 2013
64Exe={src}\vcredist_x64_2013.exe
Argument=/q /passive
BeforeInstall=1
Checked=1

First installed Visual C++ 2013 , then unpacking data process started without any problem !

Is "XTool 12_x86" still dependent to Visual C++ 2013 ?

*************************************************

"unarc.dll error code: -12 check sum error" was very deceiving !
Nobody can guess the cause at first glimpse !