DLG Kompressor

[urbanman2004]

I have another problem: when I set up multi-thread compression I was able to input the paths of the three split folders but after the compression was complete, I checked the output folder but I only able to see Setup3.bin but didn't see Setup1.bin or Setup2.bin. Idk what happened. I have enough ram (16GB) and a i7-4770K (4 cores, 8 threads) and used the compression method ULTRA (Average Speed > Req.Min_6GbRam). See below



I don't know what I could be doing wrong

[felice2011]

Originally Posted by urbanman2004

I have another problem: when I set up multi-thread compression I was able to input the paths of the three split folders but after the compression was complete, I checked the output folder but I only able to see Setup3.bin but didn't see Setup1.bin or Setup2.bin. Idk what happened. I have enough ram (16GB) and a i7-4770K (4 cores, 8 threads) and used the compression method ULTRA (Average Speed > Req.Min_6GbRam). See below



I don't know what I could be doing wrong

Nooooo Bro...You do not have to load the entire folder, in each text box, but the folders previously divided in order of number ....
No Fulll MY REPACKS...

One Texbox: C:\Users\Frank Moolah\Documents\MY REPACKS\Resident Evil 4_1
Two Texbox: C:\Users\Frank Moolah\Documents\MY REPACKS\Resident Evil 4_2
Thre Texbox: C:\Users\Frank Moolah\Documents\MY REPACKS\Resident Evil 4_3
etc...etc...etc......

[urbanman2004]

Originally Posted by felice2011

Nooooo Bro...You do not have to load the entire folder, in each text box, but the folders previously divided in order of number ....
No Fulll MY REPACKS...

One Texbox: C:\Users\Frank Moolah\Documents\MY REPACKS\Resident Evil 4_1
Two Texbox: C:\Users\Frank Moolah\Documents\MY REPACKS\Resident Evil 4_2
Thre Texbox: C:\Users\Frank Moolah\Documents\MY REPACKS\Resident Evil 4_3
etc...etc...etc......

That's exactly what I did at first, but I noticed that the path was too long so the app cuts off the destination folder "Resident Evil 4_1", etc.
I moved the split folders to the desktop and I'll try that out to see if that works

[felice2011]

Originally Posted by urbanman2004

That's exactly what I did at first, but I noticed that the path was too long so the app cuts off the destination folder "Resident Evil 4_1", etc.
I moved the split folders to the desktop and I'll try that out to see if that works

On the desktop should work surely...then move the entire folder with subfolders divided, load folders split into Kompressor, and let me know if it works..

[urbanman2004]

Originally Posted by felice2011

On the desktop should work surely...then move the entire folder with subfolders divided, load folders split into Kompressor, and let me know if it works..

One problem: After doing what I said, and completing the compression process, Setup2.bin didnt process. I only see Setup1 and 2 bin files.

[felice2011]

Originally Posted by urbanman2004

One problem: After doing what I said, and completing the compression process, Setup2.bin didnt process. I only see Setup1 and 2 bin files.

Feel me everything works perfectly, I do not understand your problems..



You can have problems of access denied to the Documents folder, or some files inside the folder of the game are not compressed by the method "precomp".
Try changing the precomp, using 0.43 if you are using 0.42.
if it does not work, use the method "SREP" without the "precomp"
Finally, I suggest you leave the My Documents folder, and work only on the desktop, input and output.

Let me know if you manage...ciauz.

Edit: Unfortunately I do not have the same game installed to give it a try