yener90's Inno Project Source Codes

[yener90]

open langscript.iss and look for romplay in custom messages.

the other one is in the code section.
just search for this text.
all infos are in langscript.iss

i hope i can manage to retail 8.0.
new features: fully supported png/jpg support
unfortunately i need to code everything new :/

[pakrat2k2]

Originally Posted by silviugut

Please gays,I need an answer to this...
I tried to do a conversion with CI 7.2.5. and even I could but I noticed some minor problems with languages ​​in menu install.One of them is that in English instead of Uninstall is Deinstall (I think the only problem with English) and in Romanian instead of Dezinstalare appears Dezinstala and instead Iesire appears Capat.
How can I change the script? (do not know which, languages ​​or installer?) Although I looked into them and I changed everything I wanted to change, but nothing has changed, remain the same issues with both languages​​! I mention I copied all ISL files from Languages folder ​​in the Languages ​​folder of Inno Setup Unicode !

Re-extract from CI.7.2.5 archive. DO NOT REPLACE THE ISL files from Inno Setup Unicode Languages folder!!!! Goto X:\CI 7.2.5\Languages folder & open english.isl / Romanian.isl look for [CustomMessages] at bottom of file, make the corrections there & save the file. No more errors!!

[vlv]

How about this one?

Originally Posted by sulfurum1989

New Precomp 42 & Srep 3


precomp -intense -o[arc archive]arc archive.arc

Like this ,,


precomp -intense -oHL2 HL2.arc


1 creates, arc file with 0 compression -m0

2 use precomp with this commands precomp -intense -oHL2 HL2.arc ( HL2 is an example)

3 use srep with this commands srep -m2 HL2.pcf HL2.srep (srep -m2 or srep -m3)

4 Compress with Freearc , HL2.srep file compression -mx -ld1600m arc , or cab file

5 Use Yener installers for Descompresion : FreeArcFile1={src}\HL2.cab;DestDir:{app};Disk:1;Pr ecSrep:1



Credits to Bamsee

I have a question.
Should I use these paramets to every game. I'm confused because for instance with Fallout we use precomp -slow -c6 -m8 and sprep m2.
Dead Rising: precomp -slow -c189 -m16.
How do I know which paramets I should use?

[BAMsE]

vlv all you need is

precomp -intense -c- filename.ext

(for older versions -slow instead -intense)

After successful operation it gives you another parameters -zl and -d (-m and - c for older versions) to speed up whole operation if somebody else tries to precompres THIS file (parameters will be different for different input files!!!)

[lupetto77]

What should I change to leave the autorun and install rimuvere images?

Thanks

[yener90]

i give up with png support...
couldnt include on my source and then started completely new.
got also problems. so no support :/

[leo95]

In InstallerScript What lines should I add to copy or create additional folders to specific directories during installation ej: in PES2012
1 - C: \ ProgramData \ KONAMI \ Pro Evolution Soccer 2012 \ download
2 - C: \ Users \ Leo \ Documents \ KONAMI \ Pro Evolution Soccer 2012

Where do I add this in InstallerScript
[HKEY_LOCAL_MACHINE \ SOFTWARE \ KONAMI \ PES2012]
"code" = "xxxx-xxxx-xxxx-xxxx-xxxx"
"installdir" = "C: \ \ Program Files \ \ KONAMI \ \ Pro Evolution Soccer 2012 \ \"
"Version" = "1.03.0000"
thanks

[lupetto77]

sorry for English use google translate


2 things I wanted to ask

------------------------------------------------------------------------------------------------------------------
1. Also in the setup.ini file I added the file PhysX, but why not start the installation even if selected, and how do I remove

and put the check mark in other programs.

Here are the lines setup.ini:

[LauncherSettings]
InstallRedist = 1

Launch1 = DirectX
Launch164 = 0
Launch1BeforeInstall = 0
LaunchCom1 = __ Installer \ directx \ redist \ DXSETUP.exe
LaunchArg1 = / silent

Launch2 = Microsoft Visual C + + 2008 x86
Launch264 = 0
Launch2BeforeInstall = 0
LaunchCom2 = __ Installer \ vc \ vc2008sp1 \ redist \ vcredist_x86.exe
LaunchArg2 = / q: a

Launch3 = Microsoft Visual C + + 2008 x64
Launch364 = 0
Launch3BeforeInstall = 0
LaunchCom3 = __ Installer \ vc \ vc2008sp1 \ redist \ vcredist_x64.exe
LaunchArg3 = / q: a

Launch4 = PhysX
Launch464 = 1
Launch4BeforeInstall = 1
LaunchCom4 = __ Installer \ PhysX \ redist \ PhysX_9.10.0513_SystemSoftware.exe
LaunchArg4 = / quiet...
-------------------------------------------------------------------------------------------------------------------------
2. I tried installing with the skin but the image comes out of the picture and the autorun does not start splashscreen starts with what I did wrong?
I have changed so in setup.ini:

DarkISSkin=1
EnableAutorunMenu=0
EnableFastInstall=0

[sulfurum1989]

and if you delete / quiet... ??

[BAMsE]

leo95 have you InnoIDE? If not - install it. Open script in InnoIDE, there is Setup options panel on the left, choose Files & directories and click add folder icon. Use

{userdocs}\KONAMI\Pro Evolution Soccer 2012

instead

C:\Users\Leo\Documents\KONAMI\Pro Evolution Soccer 2012

To add reg entry choose Registry on this panel and click new icon

[lupetto77]

PhysX_9.10.0513_SystemSoftware.exe file installation works perfectly.

What I know is how to put on and remove the checkmarks by default when I go into the installation window.

can explain line by line operation:

[LauncherSettings]
InstallRedist = 1

Launch1 = DirectX (I know)
Launch164 = 0
Launch1BeforeInstall = 0
LaunchCom1 __Installer = \ directx \ redist \ DXSETUP.exe (I know)
LaunchArg1 = / silent (I know)

[Fabioddq]

Now I was confused ...
The extension of PhysX is ".msi" or ".exe" ?

[lupetto77]

I try to explain better ...
I put the check only if you watch the picture instead Physx are all checked.
how do I do what I asked you?

[yener90]

dudes i will take time out, got some business etc.
will be back again after 3-4 months bro's

[leo95]

Originally Posted by yener90

dudes i will take time out, got some business etc.
will be back again after 3-4 months bro's

Good luck in business, and thanks for the great work, I would like to get the maximum to the functions of InnoSetup, but I understand little English and deduction according to the modified scripts from other forum users.