Big Question

[BOT]

Just some corrections to the above faq, which contains some rather bad errors.

Step 1: Click the "Disc Image/Cuesheet" option button.
Step 2: Select your CD reader from the dropdown list. It is advisable to read from your CD Recorder
Step 3: Enter the image filename.
Step 4: Click the "Copy Raw" option button.
Step 5: Set Error Recovery to ABORT.
Step 6: Set Jitter Correction to AUTO
Step 7: Set Read Retry Count to 0
Step 8: As a rule set Data Speed and Audio Speed to 1X. This can be higher but you will lose quality.(THIS IS CRAP! CAN BE ANY SPEED)
Step 9: Press the Start Button and the image will be created.

It should be painfully obvious to anyone that if ANY read errors occur the source cd is bad and NOT worth copying.
Before burning the image use CDMage to ##### image for corruption, if there is any at all DO NOT BURN, in this instance reread the cd at a slower speed, if corruption still occurs, even at 1x the source cd is bad. CDMage is available at ####://cdmage.cjb.net/

NEVER, EVER USE KODAK CDS - THESE ARE TOTAL CRAP!