Xenium Ice Trouble

[EricCamper]

Well I dl the Auto installer and burned the iso onto 3 different discs and three different xboxes and they all say unknown discs....hmmmm....and when I plug another hard drive into my chipped ICE box it just gives me error 6 unless I boot to the Ice OS and then there are not any options to help me....Weird...I must be doing something wrong

[EricCamper]

Ok.....Well. I always burn isos with record now....But I repacked the iso and then burned with decrypter...as per instructions.. lol.....and my GOOD bod boots up the discs.......But when I take the bad HD and try and boot it up...it just goes to error 6 IMMEDIATLEY.....I even boot to the OS and I hit a dead end......Again...am I missing something.....Should I update the bios on the chip or something....and if the naswer is yes....then some instructions would be awesome...Gonna play a litt Table Tennis 360 while I wait...THanx

[kosmiq]

Well might be so that the BIOS you're using is not set up in order to boot from disc first and HDD after that.

Most bioses are unless you edit them yourself. As for guides I would recommend http://www.teamxodus.com/modules.php...ownload&cid=13.

Also make sure to add some dummy file to AutoInstaller Deluxe. Problem is that mostly the xbox expect to see discs with more content than 1gb or so, so adding a 1gb dummyfile would be smart.

Moreover make sure to burn it to a DVD-r to be on the safe side... With the dummy file of course...

Latest update to AutoInstaller Deluxe has a lot of tools to insert dummyfiles and so on.

Recommended bios would be EvoX M8Plus Multi1.6 for 1.6/1.6b xbox's or X2 4983 for 1.0-1.5.