|
|
|
#1
13-01-2006, 11:50
|
|||
|
|||
|
well i replaced the cables of the master and the slave and rbooted the comp the computer goes into windows but in the bios it still shows pata master as dvd and pata slave as hdd.there is no option there to change it manually(in the drive config screen in bios).so i disconnected the ide of the dvd rom and went into bios and there it showed the pata master and slave both not detected.well my friend says here i should reset bios to default so the bios will now take the hdd as the master and not detect the slave.should i do this ? even if i do it how will i change it again when i reconnect the dvd drive as u cant change the settings of master and slave in the drive config option inthe BIOS.
|
| Sponsored Links |
|
#2
13-01-2006, 18:24
|
||||
|
||||
|
It's not that the cables you have to replace to change the master setting, it's a lil piece of plastic on a set of pins on the back of the harddrive/dvd drive whatever that you have to change, if you've had hard drive on slave all this time, when you put it on master you'll provably notice a performance increase.
__________________
I didn't ban you, BW did! [URL="http://www.cd-2-dvd.com"]cd-2-dvd.com[/URL] [QUOTE]Are you by chance a poet or writer ? Just wondering, your writing style is quite a shock to those of us who are used to illiterate warez kiddies going "OMG WT!F whErEz Da CRACKS !" all the time. You should bundle your signatures and get them published :D[/QUOTE] [QUOTE]Ever though that you never got viruses because... ... Norton didn't find them?[/QUOTE]
|
|
#3
19-01-2006, 11:40
|
|||
|
|||
|
Hey Guys If I Put Those Jumpers Then Will The Dvd Drive Work Ie The Hdd Become Master And Dvd Will Work Too
|
|
#5
20-01-2006, 18:24
|
|||
|
|||
|
Its not difficult.. Looking from the back of the drives, you will see next to the ribbon connector (to the left usually) these pins
. . . . . . . . 1234 From left to right, 1 is usually nothing (why they include the pins I dunno) 2 is Cable Select 3 is Slave 4 is Master So your DVD rom is probably set on both pins at the far right, so move it to the left 1 to set to slave. Hopefully your HD is the same pin configuration, if not look on the top of the drive there will be a guide showing you how to set to master. Oh yeah, or you could set both to master. Have the HD on the primary channel and the DVD on the secondary channel. HD's and Optical Drives, cause poor performance issues when sharing the same ribbon. Invest in another ribbon (if you have the motherboard box there maybe one in there) and keep them seperate you will notice a huge performance boost.
|
|
#6
23-01-2006, 10:16
|
|||
|
|||
|
Personal computer
A personal computer has endless problem possibilities !!
|
|
#7
10-02-2006, 15:21
|
|||
|
|||
|
i got it to work
i got it to work about a forthnight ago actuall there was a jumper on my dvd i didnt see it well it was black i i never thought why my pc guy even put it there in the first place but thanks a lot and loved playing PJKK and POPt2t.
now ive got a jumper on hdd at 7-8 and a jumper on dvd at 5-6
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
