GT Legends ?

[SteGER]

ok, i got it.

1. You must have Windows XP with SP2. Don#t know if it works on other systems.
2. IDE PCI Controller Drivers MUST be OS STANDARD IDE PCI Drivers.
3. Unpack SFCure and launch file !setup.bat an reboot.
4. If u have AMD64, then use sfcure_x64 that works same way as the other.
5. Check if all option of Daemon or Alcohol are activated especially
RMPS option.
6. Mount Alcohol 120% img and install the game.
8. Launch the file !start.bat that's in SFCure.
9. launch StarForce Nightmare 1.12
10 Select in this order "Disable node" , "Disable CD" , "Disable node" , and
the IDE channel you use for real CD/DVD units (Pr. Slave , Sc. Master o Sc.Slave), depending on how your IDE units are connected
11. Launch the game and type in the serial.
12. Play.

worked for me. i took the *.mds-File from http://www.copybase.ch
go to "datenbank" an search for GT Legends. "Show DPM-Data" an take the second one.

[glenbo]

lmfao or just plop your disc in the drive.

i mean come on lol.

[DeDouwes]

Over here i tried all the ways of installing this game. and none of them were working.
Even the MDS file of copybase.ch didn't work
I still have the Error when starting the game.
Anyone got a solution?????

[glenbo]

yeh put in your legit disc and double click the shortcut lol

[HarryHoden]

same here doesnt work...

maybe my problem is related to pont 2:
"2. IDE PCI Controller Drivers MUST be OS STANDARD IDE PCI Drivers."
How di i check if this is so?

[Joe Forster/STA]

For Windows XP (English): Control Panel, Adminstrative Tools, Computer Management, Device Manager, IDE ATA/ATAPI controllers.

[SPEEDBREAKER]

Originally Posted by SteGER

ok, i got it.

1. You must have Windows XP with SP2. Don#t know if it works on other systems.
2. IDE PCI Controller Drivers MUST be OS STANDARD IDE PCI Drivers.
3. Unpack SFCure and launch file !setup.bat an reboot.
4. If u have AMD64, then use sfcure_x64 that works same way as the other.
5. Check if all option of Daemon or Alcohol are activated especially
RMPS option.
6. Mount Alcohol 120% img and install the game.
8. Launch the file !start.bat that's in SFCure.
9. launch StarForce Nightmare 1.12
10 Select in this order "Disable node" , "Disable CD" , "Disable node" , and
the IDE channel you use for real CD/DVD units (Pr. Slave , Sc. Master o Sc.Slave), depending on how your IDE units are connected
11. Launch the game and type in the serial.
12. Play.

worked for me. i took the *.mds-File from http://www.copybase.ch
go to "datenbank" an search for GT Legends. "Show DPM-Data" an take the second one.

i am at step 10 and i want to know if something bad will happen if i disable pr slave and sc master and sc slave beacuase my previous atemps weren't good for my pc so can anybody answer my question?btw does it really work?

[Joe Forster/STA]

Plug your CD-DVD drive(s) to a different IDE channel (secondary IDE channel) than your hard disk(s) (primary IDE channel) and then you won't have problems with even disabling the whole secondary IDE channel.

[SPEEDBREAKER]

Originally Posted by Joe Forster/STA

Plug your CD-DVD drive(s) to a different IDE channel (secondary IDE channel) than your hard disk(s) (primary IDE channel) and then you won't have problems with even disabling the whole secondary IDE channel.

but if i do what it says then i won't have to worry about anything right?

[Joe Forster/STA]

With the PC hardware architecture and Windows on top of it, sorry, you always have to be worried about something...

[SPEEDBREAKER]

i think my problem is this
10 Select in this order "Disable node" , "Disable CD" , "Disable node" , and
the IDE channel you use for real CD/DVD units (Pr. Slave , Sc. Master o
Sc. Slave ) , depending on how your IDE units are connected

question 1 what does that 'o' mean? or?
question 2 how can i see how my IDE units are connected?
question 3 what are IDE units?

I found this on the internet, its a bit different, maybe it will help


1. You must have Windows XP with SP2 in order of playing gt legends

2. IDE PCI Controller Drivers MUST be OS STANDARD IDE PCI Drivers.

3. Unpack file sfcure01 that's in tools.rar and launch file !setup.bat
through MS-Dos Prompt and reboot your box.

4. If u have AMD64, then use sfcure_x64 that works same way as the other.

5. Check if all option of Daemon or Alcohol are activated especially
RMPS option
.
6. Mount Alcohol 120% img and install the game.

7. Once installation is complete, launch sfdrup.exe to update StarForce3
drivers and reboot the box.

8. Launch through MS-Dos Prompt the file !start.bat that's in the unpacked
file sfcure01.

9. Unpack file sfn.rar and launch sfn.exe (StarForce Nightmare 1.12)

10. Select in this order "Disable node" , "Disable CD" , "Disable node" , and
the IDE channel you use for real CD/DVD units (Pr. Slave , Sc. Master o Sc.
Slave ) , depending on how your IDE units are connected

11. Launch the game

12. Play.

[RincewindTheWiz]

Speedbreaker, kindly do not post any more serials.