GT Legends ?

[Eagle-666]

do you not have a no dvd crack or image?

is it so difficult to crack a game with starforce protection?

[Schhhh]

I didn't got it to work with just SFN, I had to use StarF..k 0.83 also.
I use Alcohol 120% with RPMS option checked. Tried with Daemon but
with no success.

1. You must have Windows XP with SP2 in order of playing xxxxxxx!?
2. IDE PCI Controller Drivers MUST be OS STANDARD IDE PCI Drivers!?
3. Unpack file sfcure01 that's in tools.rar and launch file !setup.bat
through MS-Dos Prompt and reboot your box.
4. If u have AMD64, then use sfcure_x64 that works same way as the other.
5. Check if all option of Daemon or Alcohol are activated especially
RMPS option.
6. Mount Alcohol 120% img and install the game.
7. Once installation is complete, launch sfdrup.exe to update
StarForce3 drivers and reboot the box.
8. Launch through MS-Dos Prompt the file !start.bat that's in the
unpacked file sfcure01.
9. Unpack file sfn.rar e launch sfn.exe (StarForce Nightmare 1.12)
10 Select in this order "Disable node" , "Disable CD" , "Disable node" , and
the IDE channel you use for real CD/DVD units (Pr. Slave , Sc. Master o
Sc. Slave ) , depending on how your IDE units are connected
11. Launch the game.
12. Play.


Try this if above fails, you must have gone through step 1 to 9 first:

Do it in this order:
1. First of all, mount the image with Alcohol 120%

2. Run StarF..k and select StarForce x.x.x.x and then disable CD Roms
(keep the program running)

3. Then run SFNightmare, disable CD, disable Node, disable Channel
(keep the program running)

Run game, if it doesn't work try with SFN again (No need to restart SFN) Maybe change disabling order.

GL!

[inflatedcow]

I gave it a shot, it beat me Im running on Windows 2003 Server, so perhaps the fault sits there. But i followed the instructions given, and i still cant play! The best i got, was burning it to DVD then giving me CD error, now all i get, is a small freeze/high cpu usage at the beginning of the checking process gets half way through and bombs out. If anyone still has any suggestions

Ive disconnected my drive, disabled node, and CD, run the sfcure01 driver, still no sucess. My OS is also unpatched.




-
Updated i got it working :

I patched my OS (2003 Server) to SP1 - Used SFCURE01 + 2003 NODE Tool that some geezer made, works a charm! + Alchol 120%

-

[OG61065]

Originally Posted by Schhhh

I didn't got it to work with just SFN, I had to use StarF..k 0.83 also.
I use Alcohol 120% with RPMS option checked. Tried with Daemon but
with no success.

1. You must have Windows XP with SP2 in order of playing xxxxxxx!?
2. IDE PCI Controller Drivers MUST be OS STANDARD IDE PCI Drivers!?
3. Unpack file sfcure01 that's in tools.rar and launch file !setup.bat
through MS-Dos Prompt and reboot your box.
4. If u have AMD64, then use sfcure_x64 that works same way as the other.
5. Check if all option of Daemon or Alcohol are activated especially
RMPS option.
6. Mount Alcohol 120% img and install the game.
7. Once installation is complete, launch sfdrup.exe to update
StarForce3 drivers and reboot the box.
8. Launch through MS-Dos Prompt the file !start.bat that's in the
unpacked file sfcure01.
9. Unpack file sfn.rar e launch sfn.exe (StarForce Nightmare 1.12)
10 Select in this order "Disable node" , "Disable CD" , "Disable node" , and
the IDE channel you use for real CD/DVD units (Pr. Slave , Sc. Master o
Sc. Slave ) , depending on how your IDE units are connected
11. Launch the game.
12. Play.


Try this if above fails, you must have gone through step 1 to 9 first:

Do it in this order:
1. First of all, mount the image with Alcohol 120%

2. Run StarF..k and select StarForce x.x.x.x and then disable CD Roms
(keep the program running)

3. Then run SFNightmare, disable CD, disable Node, disable Channel
(keep the program running)

Run game, if it doesn't work try with SFN again (No need to restart SFN) Maybe change disabling order.

GL!

Been using this forums for awhile now, thanks to all of you who take the time to put up constructive help and info, great for those of us who are poor or just plain tight and who still want to game!!!
Please Schhh, or anybody that knows, how do I find out how my IDE channel for my CD/DVD unit is connected? Am I showing my ignorance or what!!!!
"Thank-You in advance" as they say.

[RincewindTheWiz]

Go to Control Panel, then System. In the Hardware tab, there's a button for the Device Manager. In the Device Manager, there should be a line something like "IDE ATA/ATAPI-controllers, with "Primary IDE Channel" and "Secondary IDE Channel" under it (when you click on the + sign). Now for both of those, you can doubleclick on them and it should give a dialog which contains an "Advanced Settings" tab, so choose that. You'll get an overview for device 0 and device 1, these are Master and Slave on that particular channel. The easiest way to look for the optical drives is to check the Current Transfer Rate. The optical drives are almost always Ultra DMA Mode 2 or PIO while the hard drives are Ultra DMA Mode 5 or 6.