Serious problem with my Dual Channel RAMs

[Luciel]

Both memory sticks are same brand same type same everything :/ bios still has a max of 200mhz though

[kosmiq]

Are you sure the memory thingie is not adjusted by % in the bios?
I took the time to look into a review and it says;

Basic overclocking-related options are also found in the Advanced Chipset Features page:

* CPU External Frequency can change from 100 to 300MHz stepping 1MHz;
* CPU Frequency Multiple – this parameter changes somewhat irregularly. You can set it to 13.0x, 13.5x, 14.0x, 6.5x, 7.0x/15.0x, 7.5x, 8.0x/16.0x, 8.5x/16.5x, 9.0x/17.0x, and from 9.5x to 12.5x stepping 0.5;
* Memory Frequency is set up in percent of the FSB clock rate: 50%, 60%, 66%, 75%, 80%, 83%, 100%, 120%, 125%, 133%, 150%, 166%, 200%;
* CPU Vcore changes from 1.5V to 1.75V stepping 0.025V;
* AGP Frequency can be given the following values: 50MHz, from 66 to 87MHz stepping 1MHz, 90, 93, 95, 97, 100MHz.
* DDR Reference Voltage – 2.6V, 2.7V, 2.8V. That’s rather a scanty choice
* AGP VDDQ Voltage – 1.5V, 1.6V, 1.7V. We can change the voltage on the AGP slot of the mainboard.

Thats from X-bit Labs.

So by reading that I also see that you are to go to the Advanced Chipset settings tab and change what you need...

[Luciel]

yup it is all in the advance settings, doesnt change the fact u cant go more than 200mhz on the memory setting

[kosmiq]

Hmmm thats kinda strange because is the review is correct the maximum RAM speed would be 600MHz if the FSB would be set to that.
300x2 (300MHz FSB * 200% = 600).

Are you really sure that you are not adjusting it by %?
Or maybe it is some limitations because of the current FSB speed or a possible bug.

[Luciel]

ill have to check the fsb and multiplier settings next time i reboot