XBOX to XBOX

[infertility]

ok then. tell me step by step on how to do xbox to xbox, with avalaunch

[Quall999]

If you have a router, skip the 1st step:
[1.] Load up avalaunch on both xbox's. Go into network settings and make the IP's static. And not the same.
[2.] Reset if you did step one. If not, load up avalaunch on both. You only need to control 1 xbox, so just leave the second one be after launching avalaunch.
[3.] Go into the file manager. Click the right window and press start. There should be an option like "switch to remote connect". If you click it, a list of avalable networks will appear.
[4.] The other xbox should appear there is it loaded avalaunch. If not, you can pres start and add a new connection (or there is an option in the network list). Click the new connection and you just need to input the IP, Username, and Pass. It should connect.

that was off the top of my head, since someone is playing my xbox at the moment.

[infertility]

so your saying this can be done without a router right? all i need is one cable from my xbox to the other? is that correct?

[Quall999]

Yah, but you need to asign IP's to each dash. And you must be using a cross cable which you probably know already.

[TylerDurden]

Dont mean to jump in here (yeah maybe I do). But couldnt you just make a couple of avalaunch boot discs with different static IP's so that you can use them quickly on any xbox?





Tyler!

[infertility]

how do you assign an ip address to a dash? and do I add this ip address to avalaunch, and not unleashx? and yes, i know of the crossover cable

edit - what is DHCP and Static? Do I choose Static to transfer from one xbox to another without a pc?

[Quall999]

static basically means the settings won't change. Everything should be auto (except IP). Just boot up avalaunch, go into network settings, edit the IP and make it static. THen when you reboot, it should all work fine.

I would suggest you do what Tyler said, it is actually a pretty good idea. That way when you make house calls, you don't need to install that dash before doing anything.