burning 49f020T

[wizzer]

Originally Posted by Quall999

What version xbox do you have? (for reference)

And is there a link to that programmer?

Looks like a version 1.3 x-box

Programmer is the..

http://www.mcumall.com/comersus/stor...idProduct=3082

Does this help ??

[Quall999]

Hmm, was that programmer recommended to you? Have you heard other people using it? The reason I ask is because the 49F020T doesn't appear as a support chip under windbond.

If other people have used that, then it is possible that the tsop is unrecoverable. Wrong bios or too much heat could make it useless no matter what.

Did you solder those points to make it not write protected? I mean, it probably won't do anything at all if the programmer is plugged directly to all the legs, but you've got nothing to lose.

[wizzer]

I can set the jumpers, and have the chip reconised as a winbond w49F020 chip, i didnt purchase the programmer for the x-box tsops, so no loss. I originally picked it up to dump some HMS press screens were i work.

If anyone has a replacment tsop they can pre-program and send me, i`ll be willing to offer a few $$

Originally Posted by Quall999

Hmm, was that programmer recommended to you? Have you heard other people using it? The reason I ask is because the 49F020T doesn't appear as a support chip under windbond.

If other people have used that, then it is possible that the tsop is unrecoverable. Wrong bios or too much heat could make it useless no matter what.

Did you solder those points to make it not write protected? I mean, it probably won't do anything at all if the programmer is plugged directly to all the legs, but you've got nothing to lose.

[Quall999]

Well if worse comes worst, you can always buy a chip. But I imagine that is what you are trying to avoid.

[wizzer]

i have a chip here, i`d just like to have the option to have a normal tsop with a " Legal " flash code, just in case ...

BTU, yes the alladin mod works ok, i just choose another BT point, so the mod will boot no mater what button is pressed ..

Any ideas on anyone still selling 29 wire mods ??

Originally Posted by Quall999

Well if worse comes worst, you can always buy a chip. But I imagine that is what you are trying to avoid.

[Quall999]

So, you already have a mod in there? Why blows me down.
Well, you can do what i just did yesterday to my bros xbox (minus the hacked save and + the modchip).

First, make it so you can turn the chip off. A switch on the wire connecting to the d0 will do it if you don't have a way already. Just make sure those points are fully soldered to make the tsop un-write protected, turn on the xbox, switch of the modchip, and run the raincoat bios flasher to flash the onboard bios

[ihaveanosebleed]

Originally Posted by Quall999

First, make it so you can turn the chip off. A switch on the wire connecting to the d0 will do it if you don't have a way already. Just make sure those points are fully soldered to make the tsop un-write protected, turn on the xbox, switch of the modchip, and run the raincoat bios flasher to flash the onboard bios

Oooh yeah, that’s the stuff! Is there a detailed guide for that procedure anywhere?